GHC 8.0.1-rc3 source tarball availability

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
27 messages Options
12
Reply | Threaded
Open this post in threaded view
|

GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
tl;dr: If you would like to produce a binary distribution for GHC
       8.0.1-rc3 then let us know, grab the source distribution and
       start building. The binary distributions will be all released one
       week from today.


Hello GHC packagers,

Austin and I are happy to announce the release of the 8.0.1-rc3 source
distribution to binary packagers. You will find the tarball and usual
assortment of signatures at

    http://downloads.haskell.org/~ghc/8.0.1-rc3/

This release is the first where we are following our new release policy
[1], where a one-week delay will be introduced between the release of
the source and binary distributions. The goal of this policy is to give
all platforms the opportunity for support from the first day of a
release.

If all of the expected binary releases are submitted before the
week-long delay is through, we can move forward with the release ahead
of schedule. Given how late release candidate 3 is, we'd naturally like
to get the binary releases out as soon is possible: The sooner we can
get this -rc out the door the sooner we can get to the final release.
Moreover, it would be appreciated if you could confirm that you intend
to offer a binary distribution this release.

Otherwise, let either Austin or I know if you have any trouble building
your distribution. I have yet to push the 8.0.1-rc3 tag in case we
encounter unexpected issues but all of my builds with this tarball
thusfar have gone quite well.

Good luck and thanks for all of your work!

Cheers,

- Ben


[1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Geoffrey Mainland
Does it take a while for the source tarball to show up? All I see is the
Linux binary distribution.

Geoff

On 04/10/2016 11:05 AM, Ben Gamari wrote:

> tl;dr: If you would like to produce a binary distribution for GHC
>        8.0.1-rc3 then let us know, grab the source distribution and
>        start building. The binary distributions will be all released one
>        week from today.
>
>
> Hello GHC packagers,
>
> Austin and I are happy to announce the release of the 8.0.1-rc3 source
> distribution to binary packagers. You will find the tarball and usual
> assortment of signatures at
>
>     http://downloads.haskell.org/~ghc/8.0.1-rc3/
>
> This release is the first where we are following our new release policy
> [1], where a one-week delay will be introduced between the release of
> the source and binary distributions. The goal of this policy is to give
> all platforms the opportunity for support from the first day of a
> release.
>
> If all of the expected binary releases are submitted before the
> week-long delay is through, we can move forward with the release ahead
> of schedule. Given how late release candidate 3 is, we'd naturally like
> to get the binary releases out as soon is possible: The sooner we can
> get this -rc out the door the sooner we can get to the final release.
> Moreover, it would be appreciated if you could confirm that you intend
> to offer a binary distribution this release.
>
> Otherwise, let either Austin or I know if you have any trouble building
> your distribution. I have yet to push the 8.0.1-rc3 tag in case we
> encounter unexpected issues but all of my builds with this tarball
> thusfar have gone quite well.
>
> Good luck and thanks for all of your work!
>
> Cheers,
>
> - Ben
>
>
> [1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html
>
>
> _______________________________________________
> ghc-devs mailing list
> [hidden email]
> http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
Geoffrey Mainland <[hidden email]> writes:

> Does it take a while for the source tarball to show up? All I see is the
> Linux binary distribution.
>
Oh dear, it seems I moved over the wrong file. Sorry about that,
everyone.

Moreover, I noticed while looking through the patch review queue this
afternoon that there are a few patches that should really be in the RC
as well. I may take this mistake as an opportunity to fold these in.

I'll try to get a new tarball up in the next few hours and post an
update here when this happens.

Cheers,

- Ben

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Carter Schonwald
http://git.haskell.org/ghc.git also doesn't seem to list an rc3 tag yet :) 

On Sun, Apr 10, 2016 at 1:53 PM, Ben Gamari <[hidden email]> wrote:
Geoffrey Mainland <[hidden email]> writes:

> Does it take a while for the source tarball to show up? All I see is the
> Linux binary distribution.
>
Oh dear, it seems I moved over the wrong file. Sorry about that,
everyone.

Moreover, I noticed while looking through the patch review queue this
afternoon that there are a few patches that should really be in the RC
as well. I may take this mistake as an opportunity to fold these in.

I'll try to get a new tarball up in the next few hours and post an
update here when this happens.

Cheers,

- Ben

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs



_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
Carter Schonwald <[hidden email]> writes:

> http://git.haskell.org/ghc.git also doesn't seem to list an rc3 tag yet :)
>
That's correct, I mentioned in the original announcement that I didn't
push the tag yet in the in case there are issues. I likely won't push it
until we have at least a few of the binary distributions done.

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
In reply to this post by Ben Gamari-3
Ben Gamari <[hidden email]> writes:

> Geoffrey Mainland <[hidden email]> writes:
>
>> Does it take a while for the source tarball to show up? All I see is the
>> Linux binary distribution.
>>
> Oh dear, it seems I moved over the wrong file. Sorry about that,
> everyone.
>
> Moreover, I noticed while looking through the patch review queue this
> afternoon that there are a few patches that should really be in the RC
> as well. I may take this mistake as an opportunity to fold these in.
>
> I'll try to get a new tarball up in the next few hours and post an
> update here when this happens.
>
I've pushed a new tarball based on
9c48d8a02dd80bba3bd313bc52add841530e28dc. I have pushed essentially
everything into this candidate that I expect will go into 8.0.1. It
validates but it isn't nearly as well tested as the previous tree. I'll
try doing some further builds tomorrow and let you all know if anything
goes awry.

Happy building!

Cheers,

- Ben

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Carter Schonwald
https://wellposed-carter-files.s3.amazonaws.com/opensource/ghc/releasebuild-unofficial/ghc-8.0.0.20160411-x86_64-apple-darwin.tar.xz

the sha512 is 
shasum -a512 ghc-8.0.0.20160411-x86_64-apple-darwin.tar.xz
3cb8b6c2e549539eb6adf0bda080c96018485df62b59889ddc2f4023c406c2eb4e923078721c42e4be3d889ea04dffd84b05de911285f9a0daf71c95fd68fe80

enjoy!

On Sun, Apr 10, 2016 at 9:55 PM, Ben Gamari <[hidden email]> wrote:
Ben Gamari <[hidden email]> writes:

> Geoffrey Mainland <[hidden email]> writes:
>
>> Does it take a while for the source tarball to show up? All I see is the
>> Linux binary distribution.
>>
> Oh dear, it seems I moved over the wrong file. Sorry about that,
> everyone.
>
> Moreover, I noticed while looking through the patch review queue this
> afternoon that there are a few patches that should really be in the RC
> as well. I may take this mistake as an opportunity to fold these in.
>
> I'll try to get a new tarball up in the next few hours and post an
> update here when this happens.
>
I've pushed a new tarball based on
9c48d8a02dd80bba3bd313bc52add841530e28dc. I have pushed essentially
everything into this candidate that I expect will go into 8.0.1. It
validates but it isn't nearly as well tested as the previous tree. I'll
try doing some further builds tomorrow and let you all know if anything
goes awry.

Happy building!

Cheers,

- Ben

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs



_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Páli Gábor János
In reply to this post by Ben Gamari-3
2016-04-11 3:55 GMT+02:00 Ben Gamari <[hidden email]>:
> Ben Gamari <[hidden email]> writes:
> I've pushed a new tarball based on
> 9c48d8a02dd80bba3bd313bc52add841530e28dc.

The FreeBSD builds (32- and 64-bit, suitable for 9.3-RELEASE or later)
are now available there:

http://haskell.inf.elte.hu/ghc/8.0.0.20160411/
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

George Colpitts
In reply to this post by Ben Gamari-3
This fails for me with the following error; I'm using  the latest macOS and Xcode.

"inplace/bin/ghc-stage1" -o ghc/stage2/build/tmp/ghc-stage2 -hisuf dyn_hi -osuf  dyn_o -hcsuf dyn_hc -fPIC -dynamic  -H32m -O -Wall      -hide-all-packages -i -ighc/. -ighc/stage2/build -ighc/stage2/build/autogen -Ighc/stage2/build -Ighc/stage2/build/autogen    -optP-DGHCI -optP-include -optPghc/stage2/build/autogen/cabal_macros.h -package-id array-0.5.1.0 -package-id base-4.9.0.0 -package-id bytestring-0.10.7.0 -package-id containers-0.5.7.1 -package-id deepseq-1.4.2.0 -package-id directory-1.2.5.1 -package-id filepath-1.4.1.0 -package-id ghc-8.0.0.20160411 -package-id ghc-boot-8.0.0.20160411 -package-id ghci-8.0.0.20160411 -package-id haskeline-0.7.2.2 -package-id process-1.4.2.0 -package-id time-1.6 -package-id transformers-0.5.2.0 -package-id unix-2.7.2.0 -Wall -fno-warn-name-shadowing -XHaskell2010  -O2 -no-hs-main -threaded -no-user-package-db -rtsopts      -Wnoncanonical-monad-instances  -odir ghc/stage2/build -hidir ghc/stage2/build -stubdir ghc/stage2/build    -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/haskeline/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/terminfo/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/compiler/stage2/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/process/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/hpc/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/hoopl/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/ghci/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/transformers/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/template-haskell/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/pretty/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/ghc-boot/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/directory/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/unix/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/time/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/filepath/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/binary/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/containers/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/bytestring/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/deepseq/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/array/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/base/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/integer-gmp/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/libraries/ghc-prim/dist-install/build' -optl-L'/Users/gcolpitts/Downloads/ghc-8.0.0.20160411/rts/dist/build' -optl-lncurses -optl-liconv -optl-lgmp -optl-lm -optl-ldl -fPIC -dynamic  -H32m -O -Wall      -hide-all-packages -i -ighc/. -ighc/stage2/build -ighc/stage2/build/autogen -Ighc/stage2/build -Ighc/stage2/build/autogen    -optP-DGHCI -optP-include -optPghc/stage2/build/autogen/cabal_macros.h -package-id array-0.5.1.0 -package-id base-4.9.0.0 -package-id bytestring-0.10.7.0 -package-id containers-0.5.7.1 -package-id deepseq-1.4.2.0 -package-id directory-1.2.5.1 -package-id filepath-1.4.1.0 -package-id ghc-8.0.0.20160411 -package-id ghc-boot-8.0.0.20160411 -package-id ghci-8.0.0.20160411 -package-id haskeline-0.7.2.2 -package-id process-1.4.2.0 -package-id time-1.6 -package-id transformers-0.5.2.0 -package-id unix-2.7.2.0 -Wall -fno-warn-name-shadowing -XHaskell2010  -O2 -no-hs-main -threaded -no-user-package-db -rtsopts      -Wnoncanonical-monad-instances  -fno-use-rpaths -optl-Wl,-rpath -optl-Wl,'@loader_path/../haskeline-0.7.2.2' -optl-Wl,-rpath -optl-Wl,'@loader_path/../terminfo-0.4.0.2' -optl-Wl,-rpath -optl-Wl,'@loader_path/../ghc-8.0.0.20160411' -optl-Wl,-rpath -optl-Wl,'@loader_path/../process-1.4.2.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../hpc-0.6.0.3' -optl-Wl,-rpath -optl-Wl,'@loader_path/../hoopl-3.10.2.1' -optl-Wl,-rpath -optl-Wl,'@loader_path/../ghci-8.0.0.20160411' -optl-Wl,-rpath -optl-Wl,'@loader_path/../transformers-0.5.2.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../template-haskell-2.11.0.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../pretty-1.1.3.3' -optl-Wl,-rpath -optl-Wl,'@loader_path/../ghc-boot-8.0.0.20160411' -optl-Wl,-rpath -optl-Wl,'@loader_path/../directory-1.2.5.1' -optl-Wl,-rpath -optl-Wl,'@loader_path/../unix-2.7.2.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../time-1.6' -optl-Wl,-rpath -optl-Wl,'@loader_path/../filepath-1.4.1.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../binary-0.8.2.1' -optl-Wl,-rpath -optl-Wl,'@loader_path/../containers-0.5.7.1' -optl-Wl,-rpath -optl-Wl,'@loader_path/../bytestring-0.10.7.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../deepseq-1.4.2.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../array-0.5.1.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../base-4.9.0.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../integer-gmp-1.0.0.1' -optl-Wl,-rpath -optl-Wl,'@loader_path/../ghc-prim-0.5.0.0' -optl-Wl,-rpath -optl-Wl,'@loader_path/../rts' ghc/stage2/build/Main.dyn_o ghc/stage2/build/GHCi/UI.dyn_o ghc/stage2/build/GHCi/UI/Info.dyn_o ghc/stage2/build/GHCi/UI/Monad.dyn_o ghc/stage2/build/GHCi/UI/Tags.dyn_o ghc/stage2/build/hschooks.dyn_o   
Warning: -rtsopts and -with-rtsopts have no effect with -no-hs-main.
    Call hs_init_ghc() from your main() function to set these options.
Undefined symbols for architecture x86_64:
  "_stg_sel_17_upd_info", referenced from:
      _s1xEL_info in UI.dyn_o
      _s1xG6_info in UI.dyn_o
      _s1xPC_info in UI.dyn_o
      _s1xQ9_info in UI.dyn_o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
`gcc' failed in phase `Linker'. (Exit code: 1)
make[1]: *** [ghc/stage2/build/tmp/ghc-stage2] Error 1
make: *** [all] Error 2
bash-3.2$ 

 

On Sun, Apr 10, 2016 at 10:55 PM Ben Gamari <[hidden email]> wrote:
Ben Gamari <[hidden email]> writes:

> Geoffrey Mainland <[hidden email]> writes:
>
>> Does it take a while for the source tarball to show up? All I see is the
>> Linux binary distribution.
>>
> Oh dear, it seems I moved over the wrong file. Sorry about that,
> everyone.
>
> Moreover, I noticed while looking through the patch review queue this
> afternoon that there are a few patches that should really be in the RC
> as well. I may take this mistake as an opportunity to fold these in.
>
> I'll try to get a new tarball up in the next few hours and post an
> update here when this happens.
>
I've pushed a new tarball based on
9c48d8a02dd80bba3bd313bc52add841530e28dc. I have pushed essentially
everything into this candidate that I expect will go into 8.0.1. It
validates but it isn't nearly as well tested as the previous tree. I'll
try doing some further builds tomorrow and let you all know if anything
goes awry.

Happy building!

Cheers,

- Ben
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
George Colpitts <[hidden email]> writes:

> This fails for me with the following error; I'm using  the latest macOS and
> Xcode.
>
Hmm, this is very odd. Unfortunately due to firewall issues I don't have
reliable access to our OS X box, so I was unable to test this particular
tarball, but a few days ago I was able to build without any trouble.

Have you checked the obvious things (e.g. distclean, rebuild, etc.)?

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Carter Schonwald
George: does my build work for you?

On Monday, April 11, 2016, Ben Gamari <[hidden email]> wrote:
George Colpitts <<a href="javascript:;" onclick="_e(event, &#39;cvml&#39;, &#39;george.colpitts@gmail.com&#39;)">george.colpitts@...> writes:

> This fails for me with the following error; I'm using  the latest macOS and
> Xcode.
>
Hmm, this is very odd. Unfortunately due to firewall issues I don't have
reliable access to our OS X box, so I was unable to test this particular
tarball, but a few days ago I was able to build without any trouble.

Have you checked the obvious things (e.g. distclean, rebuild, etc.)?

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

George Colpitts
In reply to this post by Ben Gamari-3
Thanks Ben, none of this is obvious to me  :) I just read the doc which doesn't mention distclean or rebuild
​ which I have never had to do on earlier source distributions
. I did a make distclean, then a configure, then a make -j5 and got the same error. by rebuild do you mean do it again starting from scratch?

I did google the error, i.e. 'Haskell "_stg_sel_17_upd_info" ' and found that a few people have encountered this this month. Most importantly it led me to https://ghc.haskell.org/trac/ghc/ticket/11155#comment:10 :

Changed 2 days ago by wereHamster
↳ Reply
Ran into this trying to build HEAD today on Mac OS X 10.11.3. But a slightly different message:

Warning: -rtsopts and -with-rtsopts have no effect with -no-hs-main.
    Call hs_init_ghc() from your main() function to set these options.
Undefined symbols for architecture x86_64:
  "_stg_sel_17_upd_info", referenced from:
      _s1xPf_info in UI.dyn_o
      _s1xQA_info in UI.dyn_o
      _s1xZU_info in UI.dyn_o
      _s1y0r_info in UI.dyn_o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
`gcc' failed in phase `Linker'. (Exit code: 1)
make[1]: *** [ghc/stage2/build/tmp/ghc-stage2] Error 1
make: *** [all] Error 2

​​Should I reopen 11155 or open a new ticket?

Thanks
George



On Mon, Apr 11, 2016 at 9:33 AM Ben Gamari <[hidden email]> wrote:
George Colpitts <[hidden email]> writes:

> This fails for me with the following error; I'm using  the latest macOS and
> Xcode.
>
Hmm, this is very odd. Unfortunately due to firewall issues I don't have
reliable access to our OS X box, so I was unable to test this particular
tarball, but a few days ago I was able to build without any trouble.

Have you checked the obvious things (e.g. distclean, rebuild, etc.)?

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Carter Schonwald

George: In the mean time does my build work on your machine?

On Apr 11, 2016 5:57 PM, "George Colpitts" <[hidden email]> wrote:
Thanks Ben, none of this is obvious to me  :) I just read the doc which doesn't mention distclean or rebuild
​ which I have never had to do on earlier source distributions
. I did a make distclean, then a configure, then a make -j5 and got the same error. by rebuild do you mean do it again starting from scratch?

I did google the error, i.e. 'Haskell "_stg_sel_17_upd_info" ' and found that a few people have encountered this this month. Most importantly it led me to https://ghc.haskell.org/trac/ghc/ticket/11155#comment:10 :

Changed 2 days ago by wereHamster
↳ Reply
Ran into this trying to build HEAD today on Mac OS X 10.11.3. But a slightly different message:

Warning: -rtsopts and -with-rtsopts have no effect with -no-hs-main.
    Call hs_init_ghc() from your main() function to set these options.
Undefined symbols for architecture x86_64:
  "_stg_sel_17_upd_info", referenced from:
      _s1xPf_info in UI.dyn_o
      _s1xQA_info in UI.dyn_o
      _s1xZU_info in UI.dyn_o
      _s1y0r_info in UI.dyn_o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
`gcc' failed in phase `Linker'. (Exit code: 1)
make[1]: *** [ghc/stage2/build/tmp/ghc-stage2] Error 1
make: *** [all] Error 2

​​Should I reopen 11155 or open a new ticket?

Thanks
George



On Mon, Apr 11, 2016 at 9:33 AM Ben Gamari <[hidden email]> wrote:
George Colpitts <[hidden email]> writes:

> This fails for me with the following error; I'm using  the latest macOS and
> Xcode.
>
Hmm, this is very odd. Unfortunately due to firewall issues I don't have
reliable access to our OS X box, so I was unable to test this particular
tarball, but a few days ago I was able to build without any trouble.

Have you checked the obvious things (e.g. distclean, rebuild, etc.)?

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

George Colpitts
Yes it does.

On Mon, Apr 11, 2016 at 7:36 PM Carter Schonwald <[hidden email]> wrote:

George: In the mean time does my build work on your machine?

On Apr 11, 2016 5:57 PM, "George Colpitts" <[hidden email]> wrote:
Thanks Ben, none of this is obvious to me  :) I just read the doc which doesn't mention distclean or rebuild
​ which I have never had to do on earlier source distributions
. I did a make distclean, then a configure, then a make -j5 and got the same error. by rebuild do you mean do it again starting from scratch?

I did google the error, i.e. 'Haskell "_stg_sel_17_upd_info" ' and found that a few people have encountered this this month. Most importantly it led me to https://ghc.haskell.org/trac/ghc/ticket/11155#comment:10 :

Changed 2 days ago by wereHamster
↳ Reply
Ran into this trying to build HEAD today on Mac OS X 10.11.3. But a slightly different message:

Warning: -rtsopts and -with-rtsopts have no effect with -no-hs-main.
    Call hs_init_ghc() from your main() function to set these options.
Undefined symbols for architecture x86_64:
  "_stg_sel_17_upd_info", referenced from:
      _s1xPf_info in UI.dyn_o
      _s1xQA_info in UI.dyn_o
      _s1xZU_info in UI.dyn_o
      _s1y0r_info in UI.dyn_o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
`gcc' failed in phase `Linker'. (Exit code: 1)
make[1]: *** [ghc/stage2/build/tmp/ghc-stage2] Error 1
make: *** [all] Error 2

​​Should I reopen 11155 or open a new ticket?

Thanks
George



On Mon, Apr 11, 2016 at 9:33 AM Ben Gamari <[hidden email]> wrote:
George Colpitts <[hidden email]> writes:

> This fails for me with the following error; I'm using  the latest macOS and
> Xcode.
>
Hmm, this is very odd. Unfortunately due to firewall issues I don't have
reliable access to our OS X box, so I was unable to test this particular
tarball, but a few days ago I was able to build without any trouble.

Have you checked the obvious things (e.g. distclean, rebuild, etc.)?

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
In reply to this post by George Colpitts
George Colpitts <[hidden email]> writes:

> Thanks Ben, none of this is obvious to me :) I just read the doc which
> doesn't mention distclean or rebuild ​ which I have never had to do on
> earlier source distributions​
> ​
Hi George!

Sorry for the poor choice of words, indeed the tracking down issue like this
is anything but obvious; thanks for your time identifying this one!

For the record, `make distclean` is a more thorough variant of `make
clean`; distclean'ing a fresh source distribution should never
be necessary, although it is often a good first step just to make sure
things are in a known state.

> . I did a make distclean, then a configure, then a make -j5 and got the
> same error. by rebuild do you mean do it again starting from scratch?
>
> I did google the error, i.e. 'Haskell "_stg_sel_17_upd_info" ' and found
> that a few people have encountered this this month. Most importantly it led
> me to https://ghc.haskell.org/trac/ghc/ticket/11155#comment:10 :
>
Ahh, great find! Yes, it sounds like this issue is still not resolved
although the fact that it now only appears to occur on OS X boxen is
rather odd. Let's continue this discussion on the ticket.

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

George Colpitts
In reply to this post by Ben Gamari-3
My understanding is that the required version of llvm is 3.7. Is it safe to assume that 3.7.1 is also okay?

On Sun, Apr 10, 2016 at 12:05 PM Ben Gamari <[hidden email]> wrote:
tl;dr: If you would like to produce a binary distribution for GHC
       8.0.1-rc3 then let us know, grab the source distribution and
       start building. The binary distributions will be all released one
       week from today.


Hello GHC packagers,

Austin and I are happy to announce the release of the 8.0.1-rc3 source
distribution to binary packagers. You will find the tarball and usual
assortment of signatures at

    http://downloads.haskell.org/~ghc/8.0.1-rc3/

This release is the first where we are following our new release policy
[1], where a one-week delay will be introduced between the release of
the source and binary distributions. The goal of this policy is to give
all platforms the opportunity for support from the first day of a
release.

If all of the expected binary releases are submitted before the
week-long delay is through, we can move forward with the release ahead
of schedule. Given how late release candidate 3 is, we'd naturally like
to get the binary releases out as soon is possible: The sooner we can
get this -rc out the door the sooner we can get to the final release.
Moreover, it would be appreciated if you could confirm that you intend
to offer a binary distribution this release.

Otherwise, let either Austin or I know if you have any trouble building
your distribution. I have yet to push the 8.0.1-rc3 tag in case we
encounter unexpected issues but all of my builds with this tarball
thusfar have gone quite well.

Good luck and thanks for all of your work!

Cheers,

- Ben


[1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Ben Gamari-3
George Colpitts <[hidden email]> writes:

> My understanding is that the required version of llvm is 3.7. Is it safe to
> assume that 3.7.1 is also okay?
>
Yep, in principle anything from the 3.7 series should work.

Now that you mention it, we should probably do a better job of
advertising which LLVM versions are supported.

Cheers,

- Ben


_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

signature.asc (482 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Erik de Castro Lopo-34
In reply to this post by George Colpitts
George Colpitts wrote:

> My understanding is that the required version of llvm is 3.7. Is it safe to
> assume that 3.7.1 is also okay?
>
> On Sun, Apr 10, 2016 at 12:05 PM Ben Gamari <[hidden email]> wrote:
>
> > tl;dr: If you would like to produce a binary distribution for GHC
> >        8.0.1-rc3 then let us know, grab the source distribution and
> >        start building. The binary distributions will be all released one
> >        week from today.
> >
> >
> > Hello GHC packagers,
> >
> > Austin and I are happy to announce the release of the 8.0.1-rc3 source
> > distribution to binary packagers. You will find the tarball and usual
> > assortment of signatures at
> >
> >     http://downloads.haskell.org/~ghc/8.0.1-rc3/
> >
> > This release is the first where we are following our new release policy
> > [1], where a one-week delay will be introduced between the release of
> > the source and binary distributions. The goal of this policy is to give
> > all platforms the opportunity for support from the first day of a
> > release.
> >
> > If all of the expected binary releases are submitted before the
> > week-long delay is through, we can move forward with the release ahead
> > of schedule. Given how late release candidate 3 is, we'd naturally like
> > to get the binary releases out as soon is possible: The sooner we can
> > get this -rc out the door the sooner we can get to the final release.
> > Moreover, it would be appreciated if you could confirm that you intend
> > to offer a binary distribution this release.
> >
> > Otherwise, let either Austin or I know if you have any trouble building
> > your distribution. I have yet to push the 8.0.1-rc3 tag in case we
> > encounter unexpected issues but all of my builds with this tarball
> > thusfar have gone quite well.
> >
> > Good luck and thanks for all of your work!
> >
> > Cheers,
> >
> > - Ben
> >
> >
> > [1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html
> > _______________________________________________
> > ghc-devs mailing list
> > [hidden email]
> > http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
> >


--
----------------------------------------------------------------------
Erik de Castro Lopo
http://www.mega-nerd.com/
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

George Colpitts
In reply to this post by Ben Gamari-3
I got past my first problem (see https://ghc.haskell.org/trac/ghc/ticket/11823#comment:13 for the resolution) but now I have the following problem building the doc (on a Mac) .

It seems like it doesn't like font names with spaces, not sure why (or if!) this would be Mac specific:

       Invalid fontname `DejaVu Sans', contains ' '

longer extract from the output:

copying static files... This is XeTeX, Version 3.14159265-2.6-0.99992 (TeX Live 2015) (preloaded format=xelatex)
 restricted \write18 enabled.
entering extended mode
(./users_guide.tex
LaTeX2e <2015/01/01>
Babel <3.9l> and hyphenation patterns for 79 languages loaded.
(./sphinxmanual.cls
Document Class: sphinxmanual 2009/06/02 Document class (Sphinx manual)
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/report.cls
Document Class: report 2014/09/29 v1.4h Standard LaTeX document class
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/size10.clodone
copying extra files... done
dumping search index in English (code: en) ... )))
(/usr/local/texlive/2015/texmf-dist/tex/latex/cmap/cmap.sty

Package cmap Warning: pdftex not detected - exiting.

)done
dumping object inventory...  (/usr/local/texlive/2015/texmf-dist/tex/latex/base/fontenc.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/t1enc.defdone
build succeeded, 25 warnings.
))
(/usr/local/texlive/2015/texmf-dist/tex/generic/babel/babel.sty
(/usr/local/texlive/2015/texmf-dist/tex/generic/babel-english/english.ldf
(/usr/local/texlive/2015/texmf-dist/tex/generic/babel/babel.def
(/usr/local/texlive/2015/texmf-dist/tex/generic/babel/xebabel.def))))
(/usr/local/texlive/2015/texmf-dist/tex/latex/psnfss/times.sty) (./fncychap.sty
) (/usr/local/texlive/2015/texmf-dist/tex/latex/tools/longtable.sty)
(./sphinx.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/textcomp.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/ts1enc.def))
(/usr/local/texlive/2015/texmf-dist/tex/latex/fancybox/fancybox.sty
Style option: `fancybox' v1.4 <2010/05/15> (tvz)
) (/usr/local/texlive/2015/texmf-dist/tex/latex/titlesec/titlesec.sty)
(./tabulary.sty (/usr/local/texlive/2015/texmf-dist/tex/latex/tools/array.sty))
 (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsmath.sty
For additional information on amsmath, use the `?' option.
(/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amstext.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsgen.sty))
(/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsbsy.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsopn.sty))
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/makeidx.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/framed/framed.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/ifthen.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/color.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/color.cfg)
(/usr/local/texlive/2015/texmf-dist/tex/xelatex/xetex-def/xetex.def))
(/usr/local/texlive/2015/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty
Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix 
<2008/02/07> (tvz)
(/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/keyval.sty))
(/usr/local/texlive/2015/texmf-dist/tex/latex/threeparttable/threeparttable.sty
) (/usr/local/texlive/2015/texmf-dist/tex/latex/mdwtools/footnote.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/wrapfig/wrapfig.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/parskip/parskip.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/alltt.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/upquote/upquote.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/graphicx.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/graphics.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/trig.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/graphics.cfg)))
(/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/hyperref.sty
(/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
(/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty))
(/usr/local/texlive/2015/texmf-dist/tex/generic/ifxetex/ifxetex.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/auxhook.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/kvoptions.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/pd1enc.def)
(/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/hyperref.cfg)
(/usr/local/texlive/2015/texmf-dist/tex/latex/url/url.sty))

Package hyperref Message: Driver (autodetected): hxetex.

(/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/hxetex.def
(/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/puenc.def)
(/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/stringenc.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty))
(/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/hypcap.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/caption/newfloat.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/capt-of/capt-of.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/needspace/needspace.sty))
(/usr/local/texlive/2015/texmf-dist/tex/latex/multirow/multirow.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/eqparbox/eqparbox.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/environ/environ.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/trimspaces/trimspaces.sty)))
(/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/expl3.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/expl3-code.tex)
(/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/l3unicode-data.def)
(/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/l3xdvipdfmx.def))
(/usr/local/texlive/2015/texmf-dist/tex/latex/l3packages/xparse/xparse.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec-patches.sty)
(/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec-xetex.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/base/fontenc.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1enc.def)
(/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1lmr.fd))
(/usr/local/texlive/2015/texmf-dist/tex/xelatex/xunicode/xunicode.sty
(/usr/local/texlive/2015/texmf-dist/tex/latex/tipa/t3enc.def
(/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1lmss.fd)))
(/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec.cfg)))kpathsea:make_tex: . 


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! fontspec error: "font-not-found"
! The font "DejaVu Sans" cannot be found.
! See the fontspec documentation for further information.
! For immediate help type H <return>.
!...............................................  
                                                  
l.23 \setsansfont{DejaVu Sans}
                              

On Sun, Apr 10, 2016 at 12:05 PM Ben Gamari <[hidden email]> wrote:
tl;dr: If you would like to produce a binary distribution for GHC
       8.0.1-rc3 then let us know, grab the source distribution and
       start building. The binary distributions will be all released one
       week from today.


Hello GHC packagers,

Austin and I are happy to announce the release of the 8.0.1-rc3 source
distribution to binary packagers. You will find the tarball and usual
assortment of signatures at

    http://downloads.haskell.org/~ghc/8.0.1-rc3/

This release is the first where we are following our new release policy
[1], where a one-week delay will be introduced between the release of
the source and binary distributions. The goal of this policy is to give
all platforms the opportunity for support from the first day of a
release.

If all of the expected binary releases are submitted before the
week-long delay is through, we can move forward with the release ahead
of schedule. Given how late release candidate 3 is, we'd naturally like
to get the binary releases out as soon is possible: The sooner we can
get this -rc out the door the sooner we can get to the final release.
Moreover, it would be appreciated if you could confirm that you intend
to offer a binary distribution this release.

Otherwise, let either Austin or I know if you have any trouble building
your distribution. I have yet to push the 8.0.1-rc3 tag in case we
encounter unexpected issues but all of my builds with this tarball
thusfar have gone quite well.

Good luck and thanks for all of your work!

Cheers,

- Ben


[1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs

_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
Reply | Threaded
Open this post in threaded view
|

Re: GHC 8.0.1-rc3 source tarball availability

Austin Seipp-5
If you look at the bottom of the error, `fontspec` has already given
you the more specific diagnosis of what's wrong:

> The font "DejaVu Sans" cannot be found.

That is, you need to install the DejaVu Sans font. Dealing with fonts
and modern typesetting is a complete mystery to me though, so I'll
leave you to install it on your Mac. :)

On Wed, Apr 13, 2016 at 2:49 PM, George Colpitts
<[hidden email]> wrote:

> I got past my first problem (see
> https://ghc.haskell.org/trac/ghc/ticket/11823#comment:13 for the resolution)
> but now I have the following problem building the doc (on a Mac) .
>
> It seems like it doesn't like font names with spaces, not sure why (or if!)
> this would be Mac specific:
>
>        Invalid fontname `DejaVu Sans', contains ' '
>
> longer extract from the output:
>
> copying static files... This is XeTeX, Version 3.14159265-2.6-0.99992 (TeX
> Live 2015) (preloaded format=xelatex)
>  restricted \write18 enabled.
> entering extended mode
> (./users_guide.tex
> LaTeX2e <2015/01/01>
> Babel <3.9l> and hyphenation patterns for 79 languages loaded.
> (./sphinxmanual.cls
> Document Class: sphinxmanual 2009/06/02 Document class (Sphinx manual)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/report.cls
> Document Class: report 2014/09/29 v1.4h Standard LaTeX document class
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/size10.clodone
> copying extra files... done
> dumping search index in English (code: en) ... )))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/cmap/cmap.sty
>
> Package cmap Warning: pdftex not detected - exiting.
>
> )done
> dumping object inventory...
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/fontenc.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/t1enc.defdone
> build succeeded, 25 warnings.
> ))
> (/usr/local/texlive/2015/texmf-dist/tex/generic/babel/babel.sty
> (/usr/local/texlive/2015/texmf-dist/tex/generic/babel-english/english.ldf
> (/usr/local/texlive/2015/texmf-dist/tex/generic/babel/babel.def
> (/usr/local/texlive/2015/texmf-dist/tex/generic/babel/xebabel.def))))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/psnfss/times.sty)
> (./fncychap.sty
> ) (/usr/local/texlive/2015/texmf-dist/tex/latex/tools/longtable.sty)
> (./sphinx.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/textcomp.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/ts1enc.def))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fancybox/fancybox.sty
> Style option: `fancybox' v1.4 <2010/05/15> (tvz)
> ) (/usr/local/texlive/2015/texmf-dist/tex/latex/titlesec/titlesec.sty)
> (./tabulary.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/tools/array.sty))
>  (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsmath.sty
> For additional information on amsmath, use the `?' option.
> (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amstext.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsgen.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsbsy.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/amsmath/amsopn.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/makeidx.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/framed/framed.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/ifthen.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/color.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/color.cfg)
> (/usr/local/texlive/2015/texmf-dist/tex/xelatex/xetex-def/xetex.def))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty
> Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline
> fix
> <2008/02/07> (tvz)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/keyval.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/threeparttable/threeparttable.sty
> ) (/usr/local/texlive/2015/texmf-dist/tex/latex/mdwtools/footnote.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/wrapfig/wrapfig.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/parskip/parskip.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/alltt.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/upquote/upquote.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/graphicx.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/graphics.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/graphics/trig.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/graphics.cfg)))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/hyperref.sty
> (/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
> (/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/generic/ifxetex/ifxetex.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/auxhook.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/kvoptions.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/pd1enc.def)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/latexconfig/hyperref.cfg)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/url/url.sty))
>
> Package hyperref Message: Driver (autodetected): hxetex.
>
> (/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/hxetex.def
> (/usr/local/texlive/2015/texmf-dist/tex/latex/hyperref/puenc.def)
> (/usr/local/texlive/2015/texmf-dist/tex/generic/oberdiek/stringenc.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/oberdiek/hypcap.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/caption/newfloat.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/capt-of/capt-of.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/needspace/needspace.sty))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/multirow/multirow.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/eqparbox/eqparbox.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/environ/environ.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/trimspaces/trimspaces.sty)))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/expl3.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/expl3-code.tex)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/l3unicode-data.def)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/l3kernel/l3xdvipdfmx.def))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/l3packages/xparse/xparse.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec-patches.sty)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec-xetex.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/base/fontenc.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1enc.def)
> (/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1lmr.fd))
> (/usr/local/texlive/2015/texmf-dist/tex/xelatex/xunicode/xunicode.sty
> (/usr/local/texlive/2015/texmf-dist/tex/latex/tipa/t3enc.def
> (/usr/local/texlive/2015/texmf-dist/tex/latex/euenc/eu1lmss.fd)))
> (/usr/local/texlive/2015/texmf-dist/tex/latex/fontspec/fontspec.cfg)))kpathsea:make_tex:
> .
>
>
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> !
> ! fontspec error: "font-not-found"
> !
> ! The font "DejaVu Sans" cannot be found.
> !
> ! See the fontspec documentation for further information.
> !
> ! For immediate help type H <return>.
> !...............................................
>
> l.23 \setsansfont{DejaVu Sans}
>
> ?
>
> On Sun, Apr 10, 2016 at 12:05 PM Ben Gamari <[hidden email]> wrote:
>>
>> tl;dr: If you would like to produce a binary distribution for GHC
>>        8.0.1-rc3 then let us know, grab the source distribution and
>>        start building. The binary distributions will be all released one
>>        week from today.
>>
>>
>> Hello GHC packagers,
>>
>> Austin and I are happy to announce the release of the 8.0.1-rc3 source
>> distribution to binary packagers. You will find the tarball and usual
>> assortment of signatures at
>>
>>     http://downloads.haskell.org/~ghc/8.0.1-rc3/
>>
>> This release is the first where we are following our new release policy
>> [1], where a one-week delay will be introduced between the release of
>> the source and binary distributions. The goal of this policy is to give
>> all platforms the opportunity for support from the first day of a
>> release.
>>
>> If all of the expected binary releases are submitted before the
>> week-long delay is through, we can move forward with the release ahead
>> of schedule. Given how late release candidate 3 is, we'd naturally like
>> to get the binary releases out as soon is possible: The sooner we can
>> get this -rc out the door the sooner we can get to the final release.
>> Moreover, it would be appreciated if you could confirm that you intend
>> to offer a binary distribution this release.
>>
>> Otherwise, let either Austin or I know if you have any trouble building
>> your distribution. I have yet to push the 8.0.1-rc3 tag in case we
>> encounter unexpected issues but all of my builds with this tarball
>> thusfar have gone quite well.
>>
>> Good luck and thanks for all of your work!
>>
>> Cheers,
>>
>> - Ben
>>
>>
>> [1] https://mail.haskell.org/pipermail/ghc-devs/2016-March/011546.html
>> _______________________________________________
>> ghc-devs mailing list
>> [hidden email]
>> http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
>
>
> _______________________________________________
> ghc-devs mailing list
> [hidden email]
> http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
>



--
Regards,

Austin Seipp, Haskell Consultant
Well-Typed LLP, http://www.well-typed.com/
_______________________________________________
ghc-devs mailing list
[hidden email]
http://mail.haskell.org/cgi-bin/mailman/listinfo/ghc-devs
12