Just started working with Haskell. Need some help

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Just started working with Haskell. Need some help

Pyro Crane

Hello again.


Thank you all for your very helpful replies  (below)


Here is the error I got when I tried to run my script :


Could not find module `Graphics.GD'
Locations searched:
Graphics/GD.hs
Graphics/GD.lhs




As with the previous errors, I went on Google, to find out which module and/or package I needed to install.


Apparently, I need something called "GD"


When I tried :   cabal install gd


I got the following :




Resolving dependencies...
Configuring gd-3000.7.3...
cabal-1.16.0.2: Missing dependencies on foreign libraries:
* Missing (or bad) header file: gd.h
* Missing C libraries: gd, expat




Failed to install gd-3000.7.3
cabal-1.16.0.2: Error: some packages failed to install:
gd-3000.7.3 failed during the configure step.  The exception was: ExitFailure 1








Upon further inquiries via google,  I found somewhere the following :





This problem can usually be solved by installing the system packages that
provide these libraries (you may need the "-dev" versions). If the libraries
are already installed but in a non-standard location then you can use the
flags --extra-include-dirs= and --extra-lib-dirs= to specify where they are.






I thought I did this already.  


But, apparently, I did something wrong??














-----Original Message-----
From: beginners-request <beginners-request at haskell.org>
To: beginners <beginners at haskell.org>
Sent: Sat, Jan 18, 2014 11:35 pm
Subject: Beginners Digest, Vol 67, Issue 19



Message: 1
Date: Sat, 18 Jan 2014 12:25:01 -0500 (EST)
From: Pyro Crane <pyrocrane1 at aol.com>
To: beginners at haskell.org
Subject: [Haskell-beginners] Just started working with Haskell. Need
        some help
Message-ID: <8D0E2895A21535B-1058-8B60 at webmail-d276.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"


 

Hi,

I just started working with Haskell

Running it on a RHEL linux operating system

I was able to download and install it,  along with libraries and packages  (or,
at least, what I thought were the libraries and packages)

But, when I try to run a simple script, I keep getting the error :   "Could not
find module XXXXXX"..............

I understand what this error means ---- there is a package/library missing.

I tried using the "Cabal Update"  command,  but this did not solve the problem.

So, I am now fixing this problem the primitive way, as follows :

(a)  I use Google to first find out what the missing module is

(b)  then, based on what google says, I am able to determine the name of the
actual package that needs to be installed

(c)  I use  "Cabal Install"  to install the package

(d)  I try to run the script again

(e)  I get the same error, but this time, it cannot find a different module

(f)  I go back to Google to locate the missing module


etc, etc, etc, etc


Obviously, this is as slow as it is ridiculous...............
especially when one considers that there are probably hundreds of these
modules/packages

And, now, I've come up against a module/package,  which I am unable to locate in
Google.  It's missing from my installation, and Google does not know what it is,  
or where I can find it

Is there any way to simply install ALL required packages???   I thought I
already did this,  but obviously I missed something

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/41c15f42/attachment-0001.html>

------------------------------

Message: 2
Date: Sat, 18 Jan 2014 15:29:42 -0500
From: David McBride <toad3k at gmail.com>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID:
        <CAN+Tr42WYEPd90e5VON-VfSTvhXn7t6fwA9Cm5vaaq_uT-ZJPQ at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Look at the .cabal file for the package you are trying to compile.  It will
list all the dependencies.  If there is no cabal file you are out of luck.
You'll just have to find all the dependencies yourself.

I will say it is a bit easier to find libraries via hayoo (
http://holumbus.fh-wedel.de/hayoo/hayoo.html) than in straight google.


On Sat, Jan 18, 2014 at 12:25 PM, Pyro Crane <pyrocrane1 at aol.com> wrote:

>
>  Hi,
>
> I just started working with Haskell
>
> Running it on a RHEL linux operating system
>
> I was able to download and install it,  along with libraries and packages
> (or, at least, what I thought were the libraries and packages)
>
> But, when I try to run a simple script, I keep getting the error :   "*Could
> not find module XXXXXX*"..............
>
> I understand what this error means ---- there is a package/library missing.
>
> I tried using the "Cabal Update"  command,  but this did not solve the
> problem.
>
> So, I am now fixing this problem the primitive way, as follows :
>
>
>
>
>
>
>
>
>
>
>
>
> *(a)  I use Google to first find out what the missing module is (b)  then,
> based on what google says, I am able to determine the name of the actual
> package that needs to be installed (c)  I use  "Cabal Install"  to install
> the package (d)  I try to run the script again (e)  I get the same error,
> but this time, it cannot find a different module (f)  I go back to Google
> to locate the missing module *
>
> etc, etc, etc, etc
>
>
> Obviously, this is as slow as it is ridiculous...............
> especially when one considers that there are probably hundreds of these
> modules/packages
>
> And, now, I've come up against a module/package,  which I am unable to
> locate in Google.  It's missing from my installation, and Google does not
> know what it is,  or where I can find it
>
> Is there any way to simply install ALL required packages???   I thought I
> already did this,  but obviously I missed something
>
> Thanks
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/293ad831/attachment-0001.html>

------------------------------

Message: 3
Date: Sat, 18 Jan 2014 20:30:16 +0000
From: Courtney Robinson <courtney at crlog.info>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID:
        <CAGo6xJZ+V=NF+VOe2+tyLTWCjW6NONGzxP4EFaYJkuXvXejotA at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

How did you install Haskell?
How did you create your project?

If you haven't done so I'd suggest installing using a package from say
http://www.haskell.org/platform/

That download will install everything you need to get going.
Did you create your project using cabal init?
Maybe copy and paste the error


On Sat, Jan 18, 2014 at 5:25 PM, Pyro Crane <pyrocrane1 at aol.com> wrote:

>
>  Hi,
>
> I just started working with Haskell
>
> Running it on a RHEL linux operating system
>
> I was able to download and install it,  along with libraries and packages
> (or, at least, what I thought were the libraries and packages)
>
> But, when I try to run a simple script, I keep getting the error :   "*Could
> not find module XXXXXX*"..............
>
> I understand what this error means ---- there is a package/library missing.
>
> I tried using the "Cabal Update"  command,  but this did not solve the
> problem.
>
> So, I am now fixing this problem the primitive way, as follows :
>
>
>
>
>
>
>
>
>
>
>
>
> *(a)  I use Google to first find out what the missing module is (b)  then,
> based on what google says, I am able to determine the name of the actual
> package that needs to be installed (c)  I use  "Cabal Install"  to install
> the package (d)  I try to run the script again (e)  I get the same error,
> but this time, it cannot find a different module (f)  I go back to Google
> to locate the missing module *
>
> etc, etc, etc, etc
>
>
> Obviously, this is as slow as it is ridiculous...............
> especially when one considers that there are probably hundreds of these
> modules/packages
>
> And, now, I've come up against a module/package,  which I am unable to
> locate in Google.  It's missing from my installation, and Google does not
> know what it is,  or where I can find it
>
> Is there any way to simply install ALL required packages???   I thought I
> already did this,  but obviously I missed something
>
> Thanks
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners
>
>


--
Courtney Robinson
courtney at crlog.info
http://crlog.info
07535691628 (No private #s)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/558d0740/attachment-0001.html>

------------------------------

Message: 4
Date: Sat, 18 Jan 2014 22:26:07 +0100
From: Emanuel Koczwara <poczta at emanuelkoczwara.pl>
To: beginners at haskell.org
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <52DAF16F.7000307 at emanuelkoczwara.pl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hello,

   Try to install haskell platform from red hat repositories. I'm using
this approach with debian and it works.

Regards,
Emanuel



------------------------------

Message: 5
Date: Sat, 18 Jan 2014 21:28:43 +0000
From: Sean Charles <objitsu at gmail.com>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <147F2286-7A9D-415E-A9DF-27BE7A4CF828 at gmail.com>
Content-Type: text/plain; charset="windows-1252"

You have been blocked

You have been blocked from the server due to too many failed connection
attempts. Please contact the support centre quoting this message with your IP
address:

80.235.144.206



I guess that?s a no then???????


On 18 Jan 2014, at 21:26, Emanuel Koczwara <poczta at emanuelkoczwara.pl> wrote:

> Hello,
>
>  Try to install haskell platform from red hat repositories. I'm using this
approach with debian and it works.
>
> Regards,
> Emanuel
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/24dce336/attachment-0001.html>

------------------------------

Message: 6
Date: Sat, 18 Jan 2014 22:35:37 +0100
From: Emanuel Koczwara <poczta at emanuelkoczwara.pl>
To: beginners at haskell.org
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <52DAF3A9.2070808 at emanuelkoczwara.pl>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

Hello,

W dniu 18.01.2014 22:28, Sean Charles pisze:

>
>
>   You have been blocked
>
> You have been blocked from the server due to too many failed
> connection attempts. Please contact the support centre quoting this
> message with your IP address:
>
> *80.235.144.206*
>
>
>
> I guess that's a no then.....................
>
>
> On 18 Jan 2014, at 21:26, Emanuel Koczwara <poczta at emanuelkoczwara.pl
> <mailto:poczta at emanuelkoczwara.pl>> wrote:
>
>> Hello,
>>
>>  Try to install haskell platform from red hat repositories. I'm using
>> this approach with debian and it works.
>>
>> Regards,
>> Emanuel
>>
>> _______________________________________________
>> Beginners mailing list
>> Beginners at haskell.org <mailto:Beginners at haskell.org>
>> http://www.haskell.org/mailman/listinfo/beginners
>
>
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners

   What?

Regards,
Emanuel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/a8da64e3/attachment.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Beginners mailing list
Beginners at haskell.org
http://www.haskell.org/mailman/listinfo/beginners


------------------------------

End of Beginners Digest, Vol 67, Issue 19
*****************************************

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140120/a6680821/attachment-0001.html>

Reply | Threaded
Open this post in threaded view
|

Just started working with Haskell. Need some help

Emanuel Koczwara
Hi,

W dniu 20.01.2014 08:06, Pyro Crane pisze:

> Hello again.
>
> Thank you all for your very helpful replies  (below)
>
> Here is the error I got when I tried to run my script :
>
> *Could not find module `Graphics.GD'*
> *Locations searched:*
> *Graphics/GD.hs*
> *Graphics/GD.lhs*
>
>
> As with the previous errors, I went on Google, to find out which
> module and/or package I needed to install.
>
> Apparently, I need something called "GD"
>
> When I tried : *cabal install gd*
>
> I got the following :
>
>
> *Resolving dependencies...*
> *Configuring gd-3000.7.3...*
> *cabal-1.16.0.2: Missing dependencies on foreign libraries:*
> ** Missing (or bad) header file: gd.h*
> ** Missing C libraries: gd, expat*
>
>
> *Failed to install gd-3000.7.3*
> *cabal-1.16.0.2: Error: some packages failed to install:*
> *gd-3000.7.3 failed during the configure step.  The exception was:
> ExitFailure 1*
>
>
>
>
> Upon further inquiries via google,  I found somewhere the following :
>
>
> *This problem can usually be solved by installing the system packages
> that*
> *provide these libraries (you may need the "-dev" versions). If the
> libraries*
> *are already installed but in a non-standard location then you can use
> the*
> *flags --extra-include-dirs= and --extra-lib-dirs= to specify where
> they are.*
>
>
>
> I thought I did this already.
>
> But, apparently, I did something wrong??
>
>

   This haskell package provides only library bindings. You need to
install original library using system package manager.

Regards,
Emanuel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140120/70251435/attachment.html>

Reply | Threaded
Open this post in threaded view
|

Just started working with Haskell. Need some help

Roel van Dijk-3
If you are using a Debian based system you could try:

sudo apt-get install libgd2-xpm-dev

In general look at the package description:
http://hackage.haskell.org/package/gd-3000.7.3/gd.cabal

> Extra-libraries: gd, png, z, jpeg, m, fontconfig, freetype, expat
These extra libraries are required by the package and have to be installed
using the system package manager, as Emanuel pointed out.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140120/452b028b/attachment.html>

Reply | Threaded
Open this post in threaded view
|

Just started working with Haskell. Need some help

Pyro Crane
In reply to this post by Pyro Crane
Hi,


Thanks for the replies.


I was able to solve the problem


Simply by deleting everything completely...........and re-installing the ghc from scratch,  along with all haskell packages


(This is what I did earlier;  but apparently, I missed something)


Anyway, it's working fine now










-----Original Message-----
From: Pyro Crane <pyrocrane1 at aol.com>
To: beginners <beginners at haskell.org>
Sent: Mon, Jan 20, 2014 9:06 am
Subject: Re:  Just started working with Haskell. Need some help


Hello again.


Thank you all for your very helpful replies  (below)


Here is the error I got when I tried to run my script :


Could not find module `Graphics.GD'
Locations searched:
Graphics/GD.hs
Graphics/GD.lhs




As with the previous errors, I went on Google, to find out which module and/or package I needed to install.


Apparently, I need something called "GD"


When I tried :   cabal install gd


I got the following :




Resolving dependencies...
Configuring gd-3000.7.3...
cabal-1.16.0.2: Missing dependencies on foreign libraries:
* Missing (or bad) header file: gd.h
* Missing C libraries: gd, expat




Failed to install gd-3000.7.3
cabal-1.16.0.2: Error: some packages failed to install:
gd-3000.7.3 failed during the configure step.  The exception was: ExitFailure 1








Upon further inquiries via google,  I found somewhere the following :





This problem can usually be solved by installing the system packages that
provide these libraries (you may need the "-dev" versions). If the libraries
are already installed but in a non-standard location then you can use the
flags --extra-include-dirs= and --extra-lib-dirs= to specify where they are.






I thought I did this already.  


But, apparently, I did something wrong??














-----Original Message-----
From: beginners-request <beginners-request at haskell.org>
To: beginners <beginners at haskell.org>
Sent: Sat, Jan 18, 2014 11:35 pm
Subject: Beginners Digest, Vol 67, Issue 19



Message: 1
Date: Sat, 18 Jan 2014 12:25:01 -0500 (EST)
From: Pyro Crane <pyrocrane1 at aol.com>
To: beginners at haskell.org
Subject: [Haskell-beginners] Just started working with Haskell. Need
        some help
Message-ID: <8D0E2895A21535B-1058-8B60 at webmail-d276.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"


 

Hi,

I just started working with Haskell

Running it on a RHEL linux operating system

I was able to download and install it,  along with libraries and packages  (or,
at least, what I thought were the libraries and packages)

But, when I try to run a simple script, I keep getting the error :   "Could not
find module XXXXXX"..............

I understand what this error means ---- there is a package/library missing.

I tried using the "Cabal Update"  command,  but this did not solve the problem.

So, I am now fixing this problem the primitive way, as follows :

(a)  I use Google to first find out what the missing module is

(b)  then, based on what google says, I am able to determine the name of the
actual package that needs to be installed

(c)  I use  "Cabal Install"  to install the package

(d)  I try to run the script again

(e)  I get the same error, but this time, it cannot find a different module

(f)  I go back to Google to locate the missing module


etc, etc, etc, etc


Obviously, this is as slow as it is ridiculous...............
especially when one considers that there are probably hundreds of these
modules/packages

And, now, I've come up against a module/package,  which I am unable to locate in
Google.  It's missing from my installation, and Google does not know what it is,  
or where I can find it

Is there any way to simply install ALL required packages???   I thought I
already did this,  but obviously I missed something

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/41c15f42/attachment-0001.html>

------------------------------

Message: 2
Date: Sat, 18 Jan 2014 15:29:42 -0500
From: David McBride <toad3k at gmail.com>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID:
        <CAN+Tr42WYEPd90e5VON-VfSTvhXn7t6fwA9Cm5vaaq_uT-ZJPQ at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Look at the .cabal file for the package you are trying to compile.  It will
list all the dependencies.  If there is no cabal file you are out of luck.
You'll just have to find all the dependencies yourself.

I will say it is a bit easier to find libraries via hayoo (
http://holumbus.fh-wedel.de/hayoo/hayoo.html) than in straight google.


On Sat, Jan 18, 2014 at 12:25 PM, Pyro Crane <pyrocrane1 at aol.com> wrote:

>
>  Hi,
>
> I just started working with Haskell
>
> Running it on a RHEL linux operating system
>
> I was able to download and install it,  along with libraries and packages
> (or, at least, what I thought were the libraries and packages)
>
> But, when I try to run a simple script, I keep getting the error :   "*Could
> not find module XXXXXX*"..............
>
> I understand what this error means ---- there is a package/library missing.
>
> I tried using the "Cabal Update"  command,  but this did not solve the
> problem.
>
> So, I am now fixing this problem the primitive way, as follows :
>
>
>
>
>
>
>
>
>
>
>
>
> *(a)  I use Google to first find out what the missing module is (b)  then,
> based on what google says, I am able to determine the name of the actual
> package that needs to be installed (c)  I use  "Cabal Install"  to install
> the package (d)  I try to run the script again (e)  I get the same error,
> but this time, it cannot find a different module (f)  I go back to Google
> to locate the missing module *
>
> etc, etc, etc, etc
>
>
> Obviously, this is as slow as it is ridiculous...............
> especially when one considers that there are probably hundreds of these
> modules/packages
>
> And, now, I've come up against a module/package,  which I am unable to
> locate in Google.  It's missing from my installation, and Google does not
> know what it is,  or where I can find it
>
> Is there any way to simply install ALL required packages???   I thought I
> already did this,  but obviously I missed something
>
> Thanks
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/293ad831/attachment-0001.html>

------------------------------

Message: 3
Date: Sat, 18 Jan 2014 20:30:16 +0000
From: Courtney Robinson <courtney at crlog.info>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID:
        <CAGo6xJZ+V=NF+VOe2+tyLTWCjW6NONGzxP4EFaYJkuXvXejotA at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

How did you install Haskell?
How did you create your project?

If you haven't done so I'd suggest installing using a package from say
http://www.haskell.org/platform/

That download will install everything you need to get going.
Did you create your project using cabal init?
Maybe copy and paste the error


On Sat, Jan 18, 2014 at 5:25 PM, Pyro Crane <pyrocrane1 at aol.com> wrote:

>
>  Hi,
>
> I just started working with Haskell
>
> Running it on a RHEL linux operating system
>
> I was able to download and install it,  along with libraries and packages
> (or, at least, what I thought were the libraries and packages)
>
> But, when I try to run a simple script, I keep getting the error :   "*Could
> not find module XXXXXX*"..............
>
> I understand what this error means ---- there is a package/library missing.
>
> I tried using the "Cabal Update"  command,  but this did not solve the
> problem.
>
> So, I am now fixing this problem the primitive way, as follows :
>
>
>
>
>
>
>
>
>
>
>
>
> *(a)  I use Google to first find out what the missing module is (b)  then,
> based on what google says, I am able to determine the name of the actual
> package that needs to be installed (c)  I use  "Cabal Install"  to install
> the package (d)  I try to run the script again (e)  I get the same error,
> but this time, it cannot find a different module (f)  I go back to Google
> to locate the missing module *
>
> etc, etc, etc, etc
>
>
> Obviously, this is as slow as it is ridiculous...............
> especially when one considers that there are probably hundreds of these
> modules/packages
>
> And, now, I've come up against a module/package,  which I am unable to
> locate in Google.  It's missing from my installation, and Google does not
> know what it is,  or where I can find it
>
> Is there any way to simply install ALL required packages???   I thought I
> already did this,  but obviously I missed something
>
> Thanks
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners
>
>


--
Courtney Robinson
courtney at crlog.info
http://crlog.info
07535691628 (No private #s)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/558d0740/attachment-0001.html>

------------------------------

Message: 4
Date: Sat, 18 Jan 2014 22:26:07 +0100
From: Emanuel Koczwara <poczta at emanuelkoczwara.pl>
To: beginners at haskell.org
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <52DAF16F.7000307 at emanuelkoczwara.pl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hello,

   Try to install haskell platform from red hat repositories. I'm using
this approach with debian and it works.

Regards,
Emanuel



------------------------------

Message: 5
Date: Sat, 18 Jan 2014 21:28:43 +0000
From: Sean Charles <objitsu at gmail.com>
To: The Haskell-Beginners Mailing List - Discussion of primarily
        beginner-level topics related to Haskell <beginners at haskell.org>
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <147F2286-7A9D-415E-A9DF-27BE7A4CF828 at gmail.com>
Content-Type: text/plain; charset="windows-1252"

You have been blocked

You have been blocked from the server due to too many failed connection
attempts. Please contact the support centre quoting this message with your IP
address:

80.235.144.206



I guess that?s a no then???????


On 18 Jan 2014, at 21:26, Emanuel Koczwara <poczta at emanuelkoczwara.pl> wrote:

> Hello,
>
>  Try to install haskell platform from red hat repositories. I'm using this
approach with debian and it works.
>
> Regards,
> Emanuel
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/24dce336/attachment-0001.html>

------------------------------

Message: 6
Date: Sat, 18 Jan 2014 22:35:37 +0100
From: Emanuel Koczwara <poczta at emanuelkoczwara.pl>
To: beginners at haskell.org
Subject: Re: [Haskell-beginners] Just started working with Haskell.
        Need some help
Message-ID: <52DAF3A9.2070808 at emanuelkoczwara.pl>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

Hello,

W dniu 18.01.2014 22:28, Sean Charles pisze:

>
>
>   You have been blocked
>
> You have been blocked from the server due to too many failed
> connection attempts. Please contact the support centre quoting this
> message with your IP address:
>
> *80.235.144.206*
>
>
>
> I guess that's a no then.....................
>
>
> On 18 Jan 2014, at 21:26, Emanuel Koczwara <poczta at emanuelkoczwara.pl
> <mailto:poczta at emanuelkoczwara.pl>> wrote:
>
>> Hello,
>>
>>  Try to install haskell platform from red hat repositories. I'm using
>> this approach with debian and it works.
>>
>> Regards,
>> Emanuel
>>
>> _______________________________________________
>> Beginners mailing list
>> Beginners at haskell.org <mailto:Beginners at haskell.org>
>> http://www.haskell.org/mailman/listinfo/beginners
>
>
>
> _______________________________________________
> Beginners mailing list
> Beginners at haskell.org
> http://www.haskell.org/mailman/listinfo/beginners

   What?

Regards,
Emanuel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140118/a8da64e3/attachment.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Beginners mailing list
Beginners at haskell.org
http://www.haskell.org/mailman/listinfo/beginners


------------------------------

End of Beginners Digest, Vol 67, Issue 19
*****************************************

 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.haskell.org/pipermail/beginners/attachments/20140122/8625fa8a/attachment-0001.html>