Hi all,
I believe I've worked around the issues with make binary-dist and cross-compilation. This should be a working binary for iOS devices https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 Please try ./configure && make install (it should live happily next to your current ghc as arm-apple-darwin10-ghc) and let me know so we can have a build ready for 7.8 RC2! Cheers Luke -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.haskell.org/pipermail/ghc-devs/attachments/20140204/de848037/attachment.html> |
Hello Luke,
It installed without problems under Mac OS X Mavericks and reports the version correctly. If there is some documentation that you can point me to I will test on my simulator and iPhone. Thanks, Dominick On Wed, Feb 5, 2014 at 1:36 AM, Luke Iannini <lukexipd at gmail.com> wrote: > Hi all, > > I believe I've worked around the issues with make binary-dist and > cross-compilation. > > This should be a working binary for iOS devices > https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 > > Please try ./configure && make install (it should live happily next to your > current ghc as arm-apple-darwin10-ghc) and let me know so we can have a > build ready for 7.8 RC2! > > Cheers > Luke > > _______________________________________________ > ghc-devs mailing list > ghc-devs at haskell.org > http://www.haskell.org/mailman/listinfo/ghc-devs > |
Hi Dominick and all,
That's great news! I've created a README here: https://github.com/ghc-ios/ghc-ios-scripts/blob/master/README.md Note that the binary posted above is only for the device. I'll post the simulator version shortly along with instructions on how to create fat libraries that contain both simulator and device code. Please let me know if you have any questions or issues! Very best Luke On Tue, Feb 4, 2014 at 11:35 PM, Dominick Samperi <djsamperi at gmail.com>wrote: > Hello Luke, > > It installed without problems under Mac OS X Mavericks and reports the > version correctly. If there is some documentation that you can point me to > I will test on my simulator and iPhone. > > Thanks, > Dominick > > > On Wed, Feb 5, 2014 at 1:36 AM, Luke Iannini <lukexipd at gmail.com> wrote: > > Hi all, > > > > I believe I've worked around the issues with make binary-dist and > > cross-compilation. > > > > This should be a working binary for iOS devices > > > https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 > > > > Please try ./configure && make install (it should live happily next to > your > > current ghc as arm-apple-darwin10-ghc) and let me know so we can have a > > build ready for 7.8 RC2! > > > > Cheers > > Luke > > > > _______________________________________________ > > ghc-devs mailing list > > ghc-devs at haskell.org > > http://www.haskell.org/mailman/listinfo/ghc-devs > > > An HTML attachment was scrubbed... URL: <http://www.haskell.org/pipermail/ghc-devs/attachments/20140205/7612ae91/attachment.html> |
[Luke: forgot to forward to list, sorry for the duplicates]
There are two issues: 1. When I build Counter.a I see lots of messages from libtool saying "has no symbols", for example: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: for architecture: armv7s file: /usr/local/lib/arm-apple-darwin10-ghc-7.8.20140129/rts-1.0/libHSrts_thr.a(Sanity.thr_o) has no symbols 2. I have not (yet) joined the developer program since I have no plans to deploy to the app store, so instead I have been following the instructions here to deploy to my own device: http://www.sysrage.net/guides/ios-programming/building-and-running-ios-applications-without-a-paid-developer-license Following these instructions I am able to copy HaskellCounter (my name for your test app) to my device, and I see the HaskellCounter icon, but when I start the app I just see a blank screen. Looking at Counter.hs this is not too surprising, as I see no code that would update the Single View screen? I'm not sure where the output of putStrLn goes when an app is run on the device. Dominick On Wed, Feb 5, 2014 at 4:27 AM, Luke Iannini <lukexipd at gmail.com> wrote: > Hi Dominick and all, > > That's great news! > > I've created a README here: > https://github.com/ghc-ios/ghc-ios-scripts/blob/master/README.md > > Note that the binary posted above is only for the device. I'll post the > simulator version shortly along with instructions on how to create fat > libraries that contain both simulator and device code. > > Please let me know if you have any questions or issues! > > Very best > Luke > > > On Tue, Feb 4, 2014 at 11:35 PM, Dominick Samperi <djsamperi at gmail.com> > wrote: >> >> Hello Luke, >> >> It installed without problems under Mac OS X Mavericks and reports the >> version correctly. If there is some documentation that you can point me to >> I will test on my simulator and iPhone. >> >> Thanks, >> Dominick >> >> >> On Wed, Feb 5, 2014 at 1:36 AM, Luke Iannini <lukexipd at gmail.com> wrote: >> > Hi all, >> > >> > I believe I've worked around the issues with make binary-dist and >> > cross-compilation. >> > >> > This should be a working binary for iOS devices >> > >> > https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 >> > >> > Please try ./configure && make install (it should live happily next to >> > your >> > current ghc as arm-apple-darwin10-ghc) and let me know so we can have a >> > build ready for 7.8 RC2! >> > >> > Cheers >> > Luke >> > >> > _______________________________________________ >> > ghc-devs mailing list >> > ghc-devs at haskell.org >> > http://www.haskell.org/mailman/listinfo/ghc-devs >> > > > |
Hi Dominick,
Awesome. Sounds like everything's working perfectly : ). The 'has no symbols' messages are normal and harmless; I think they can be fixed but in the meantime there is a script in ghc-ios-scripts called "libtool-quiet" that silences them. You can use it by adding -pgmlibtool libtool-quiet to your GHC arguments. The output just goes to the iPhone's console which is normally shown in Xcode when you run, but you can also access it with Apple's "iPhone Configurator" app. https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12 . (You could also modify the example to return e.g. an Int and put that on the screen with a UILabel or similar -- you can call Haskell from anywhere in your app as long as you've called hs_init at the very beginning. A nice trick is to create an NSObject category with a + (void)load { hs_init(NULL, NULL) } method, which will ensure hs_init is called very early in your program and then you don't have to worry about it anymore.) Thanks so much for testing! Cheers Luke On Wed, Feb 5, 2014 at 10:22 AM, Dominick Samperi <djsamperi at gmail.com>wrote: > [Luke: forgot to forward to list, sorry for the duplicates] > > There are two issues: > > 1. When I build Counter.a I see lots of messages from libtool saying > "has no symbols", > for example: > > /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: > for architecture: armv7s file: > > /usr/local/lib/arm-apple-darwin10-ghc-7.8.20140129/rts-1.0/libHSrts_thr.a(Sanity.thr_o) > has no symbols > > 2. I have not (yet) joined the developer program since I have no plans to > deploy > to the app store, so instead I have been following the > instructions here to deploy > to my own device: > > http://www.sysrage.net/guides/ios-programming/building-and-running-ios-applications-without-a-paid-developer-license > > Following these instructions I am able to copy HaskellCounter (my name for > your test app) to my device, and I see the HaskellCounter icon, but when I > start the app I just see a blank screen. Looking at > > Counter.hs this is not too surprising, as I see no code that would update > the > Single View screen? I'm not sure where the output of putStrLn goes when > an app is run on the device. > > Dominick > > > On Wed, Feb 5, 2014 at 4:27 AM, Luke Iannini <lukexipd at gmail.com> wrote: > > Hi Dominick and all, > > > > That's great news! > > > > I've created a README here: > > https://github.com/ghc-ios/ghc-ios-scripts/blob/master/README.md > > > > Note that the binary posted above is only for the device. I'll post the > > simulator version shortly along with instructions on how to create fat > > libraries that contain both simulator and device code. > > > > Please let me know if you have any questions or issues! > > > > Very best > > Luke > > > > > > On Tue, Feb 4, 2014 at 11:35 PM, Dominick Samperi <djsamperi at gmail.com> > > wrote: > >> > >> Hello Luke, > >> > >> It installed without problems under Mac OS X Mavericks and reports the > >> version correctly. If there is some documentation that you can point me > to > >> I will test on my simulator and iPhone. > >> > >> Thanks, > >> Dominick > >> > >> > >> On Wed, Feb 5, 2014 at 1:36 AM, Luke Iannini <lukexipd at gmail.com> > wrote: > >> > Hi all, > >> > > >> > I believe I've worked around the issues with make binary-dist and > >> > cross-compilation. > >> > > >> > This should be a working binary for iOS devices > >> > > >> > > https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 > >> > > >> > Please try ./configure && make install (it should live happily next to > >> > your > >> > current ghc as arm-apple-darwin10-ghc) and let me know so we can have > a > >> > build ready for 7.8 RC2! > >> > > >> > Cheers > >> > Luke > >> > > >> > _______________________________________________ > >> > ghc-devs mailing list > >> > ghc-devs at haskell.org > >> > http://www.haskell.org/mailman/listinfo/ghc-devs > >> > > > > > > An HTML attachment was scrubbed... URL: <http://www.haskell.org/pipermail/ghc-devs/attachments/20140205/8f1db7b4/attachment.html> |
Thanks Luke,
It inserted a GUI component just to be sure that the app with Haskell embedded is running properly, and I'm happy to report that it is. I could not get Apple Configurator do show the app console log, and several apps that used to provide this service were broken by recent Apple updates. I tried reading the socket syslog.sock (on the device), but apparently app console logs are not sent here. I guess I need to join the developer program to do simple things like read logs. Dominick On Wed, Feb 5, 2014 at 3:50 PM, Luke Iannini <lukexipd at gmail.com> wrote: > Hi Dominick, > > Awesome. Sounds like everything's working perfectly : ). The 'has no > symbols' messages are normal and harmless; I think they can be fixed but in > the meantime there is a script in ghc-ios-scripts called "libtool-quiet" > that silences them. You can use it by adding -pgmlibtool libtool-quiet to > your GHC arguments. > > The output just goes to the iPhone's console which is normally shown in > Xcode when you run, but you can also access it with Apple's "iPhone > Configurator" app. > https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12 . > > (You could also modify the example to return e.g. an Int and put that on the > screen with a UILabel or similar -- you can call Haskell from anywhere in > your app as long as you've called hs_init at the very beginning. A nice > trick is to create an NSObject category with a + (void)load { hs_init(NULL, > NULL) } method, which will ensure hs_init is called very early in your > program and then you don't have to worry about it anymore.) > > Thanks so much for testing! > Cheers > Luke > > > On Wed, Feb 5, 2014 at 10:22 AM, Dominick Samperi <djsamperi at gmail.com> > wrote: >> >> [Luke: forgot to forward to list, sorry for the duplicates] >> >> There are two issues: >> >> 1. When I build Counter.a I see lots of messages from libtool saying >> "has no symbols", >> for example: >> >> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: >> for architecture: armv7s file: >> >> /usr/local/lib/arm-apple-darwin10-ghc-7.8.20140129/rts-1.0/libHSrts_thr.a(Sanity.thr_o) >> has no symbols >> >> 2. I have not (yet) joined the developer program since I have no plans to >> deploy >> to the app store, so instead I have been following the >> instructions here to deploy >> to my own device: >> >> http://www.sysrage.net/guides/ios-programming/building-and-running-ios-applications-without-a-paid-developer-license >> >> Following these instructions I am able to copy HaskellCounter (my name >> for >> your test app) to my device, and I see the HaskellCounter icon, but when I >> start the app I just see a blank screen. Looking at >> >> Counter.hs this is not too surprising, as I see no code that would update >> the >> Single View screen? I'm not sure where the output of putStrLn goes when >> an app is run on the device. >> >> Dominick >> >> >> On Wed, Feb 5, 2014 at 4:27 AM, Luke Iannini <lukexipd at gmail.com> wrote: >> > Hi Dominick and all, >> > >> > That's great news! >> > >> > I've created a README here: >> > https://github.com/ghc-ios/ghc-ios-scripts/blob/master/README.md >> > >> > Note that the binary posted above is only for the device. I'll post the >> > simulator version shortly along with instructions on how to create fat >> > libraries that contain both simulator and device code. >> > >> > Please let me know if you have any questions or issues! >> > >> > Very best >> > Luke >> > >> > >> > On Tue, Feb 4, 2014 at 11:35 PM, Dominick Samperi <djsamperi at gmail.com> >> > wrote: >> >> >> >> Hello Luke, >> >> >> >> It installed without problems under Mac OS X Mavericks and reports the >> >> version correctly. If there is some documentation that you can point me >> >> to >> >> I will test on my simulator and iPhone. >> >> >> >> Thanks, >> >> Dominick >> >> >> >> >> >> On Wed, Feb 5, 2014 at 1:36 AM, Luke Iannini <lukexipd at gmail.com> >> >> wrote: >> >> > Hi all, >> >> > >> >> > I believe I've worked around the issues with make binary-dist and >> >> > cross-compilation. >> >> > >> >> > This should be a working binary for iOS devices >> >> > >> >> > >> >> > https://github.com/ghc-ios/ghc-ios-scripts/releases/download/7.8-rc1-device/ghc-7.8.20140129-arm-apple-ios.tar.bz2 >> >> > >> >> > Please try ./configure && make install (it should live happily next >> >> > to >> >> > your >> >> > current ghc as arm-apple-darwin10-ghc) and let me know so we can have >> >> > a >> >> > build ready for 7.8 RC2! >> >> > >> >> > Cheers >> >> > Luke >> >> > >> >> > _______________________________________________ >> >> > ghc-devs mailing list >> >> > ghc-devs at haskell.org >> >> > http://www.haskell.org/mailman/listinfo/ghc-devs >> >> > >> > >> > > > |
Free forum by Nabble | Edit this page |