xmonad: xmonad-extras 0.12 fails to build

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Dave Macias
This is my first time posting here so i hope im doing this right.
Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib, and
xmobar.
I also use xmonad-extras but it failed during the build. I tried using
cabal and also from source but both give same output:

$ cabal install xmonad-extras

Resolving dependencies...
Configuring xmonad-extras-0.12...
Building xmonad-extras-0.12...
Failed to install xmonad-extras-0.12
Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
Configuring xmonad-extras-0.12...
Building xmonad-extras-0.12...
Preprocessing library xmonad-extras-0.12...
[1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
XMonad/Util/WindowPropertiesRE.hs,
dist/build/XMonad/Util/WindowPropertiesRE.o )
[2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
dist/build/XMonad/Actions/Volume.o )

XMonad/Actions/Volume.hs:173:23:
    Ambiguous occurrence ?<*?
    It could refer to either ?XMonad.Actions.Volume.<*?,
                             defined at XMonad/Actions/Volume.hs:66:4
                          or ?Prelude.<*?,
                             imported from ?Prelude? at
XMonad/Actions/Volume.hs:15:8-28
                             (and originally defined in ?GHC.Base?)

XMonad/Actions/Volume.hs:173:43:
    Ambiguous occurrence ?<*?
    It could refer to either ?XMonad.Actions.Volume.<*?,
                             defined at XMonad/Actions/Volume.hs:66:4
                          or ?Prelude.<*?,
                             imported from ?Prelude? at
XMonad/Actions/Volume.hs:15:8-28
                             (and originally defined in ?GHC.Base?)

XMonad/Actions/Volume.hs:200:62:
    Ambiguous occurrence ?<*?
    It could refer to either ?XMonad.Actions.Volume.<*?,
                             defined at XMonad/Actions/Volume.hs:66:4
                          or ?Prelude.<*?,
                             imported from ?Prelude? at
XMonad/Actions/Volume.hs:15:8-28
                             (and originally defined in ?GHC.Base?)

XMonad/Actions/Volume.hs:215:32:
    Ambiguous occurrence ?<*?
    It could refer to either ?XMonad.Actions.Volume.<*?,
                             defined at XMonad/Actions/Volume.hs:66:4
                          or ?Prelude.<*?,
                             imported from ?Prelude? at
XMonad/Actions/Volume.hs:15:8-28
                             (and originally defined in ?GHC.Base?)

XMonad/Actions/Volume.hs:225:58:
    Ambiguous occurrence ?<*?

    It could refer to either ?XMonad.Actions.Volume.<*?,
                             defined at XMonad/Actions/Volume.hs:66:4
                          or ?Prelude.<*?,
                             imported from ?Prelude? at
XMonad/Actions/Volume.hs:15:8-28
                             (and originally defined in ?GHC.Base?)
cabal: Error: some packages failed to install:
xmonad-extras-0.12 failed during the building phase. The exception was:
ExitFailure 1


I got to look at the log but it just has what i pasted above. System is
Arch 3.19.2-1-ARCH

Any input is appreciated.
Thanks
dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150406/1dc37de4/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Brent Yorgey
It looks like XMonad.Actions.Volume defines an operator (<*), but as of
base-4.8 an operator with that name has been added to the Prelude.  The fix
would be to either (1) rename the operator in XMonad.Actions.Volume, or (2)
hide the operator from Prelude and tell everyone who wants to use
XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.

xmonad-extras is not officially a part of the xmonad project; you should
contact the maintainers listed at
http://hackage.haskell.org/package/xmonad-extras .

-Brent

On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:

> This is my first time posting here so i hope im doing this right.
> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib, and
> xmobar.
> I also use xmonad-extras but it failed during the build. I tried using
> cabal and also from source but both give same output:
>
> $ cabal install xmonad-extras
>
> Resolving dependencies...
> Configuring xmonad-extras-0.12...
> Building xmonad-extras-0.12...
> Failed to install xmonad-extras-0.12
> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
> Configuring xmonad-extras-0.12...
> Building xmonad-extras-0.12...
> Preprocessing library xmonad-extras-0.12...
> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
> XMonad/Util/WindowPropertiesRE.hs,
> dist/build/XMonad/Util/WindowPropertiesRE.o )
> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
> dist/build/XMonad/Actions/Volume.o )
>
> XMonad/Actions/Volume.hs:173:23:
>     Ambiguous occurrence ?<*?
>     It could refer to either ?XMonad.Actions.Volume.<*?,
>                              defined at XMonad/Actions/Volume.hs:66:4
>                           or ?Prelude.<*?,
>                              imported from ?Prelude? at
> XMonad/Actions/Volume.hs:15:8-28
>                              (and originally defined in ?GHC.Base?)
>
> XMonad/Actions/Volume.hs:173:43:
>     Ambiguous occurrence ?<*?
>     It could refer to either ?XMonad.Actions.Volume.<*?,
>                              defined at XMonad/Actions/Volume.hs:66:4
>                           or ?Prelude.<*?,
>                              imported from ?Prelude? at
> XMonad/Actions/Volume.hs:15:8-28
>                              (and originally defined in ?GHC.Base?)
>
> XMonad/Actions/Volume.hs:200:62:
>     Ambiguous occurrence ?<*?
>     It could refer to either ?XMonad.Actions.Volume.<*?,
>                              defined at XMonad/Actions/Volume.hs:66:4
>                           or ?Prelude.<*?,
>                              imported from ?Prelude? at
> XMonad/Actions/Volume.hs:15:8-28
>                              (and originally defined in ?GHC.Base?)
>
> XMonad/Actions/Volume.hs:215:32:
>     Ambiguous occurrence ?<*?
>     It could refer to either ?XMonad.Actions.Volume.<*?,
>                              defined at XMonad/Actions/Volume.hs:66:4
>                           or ?Prelude.<*?,
>                              imported from ?Prelude? at
> XMonad/Actions/Volume.hs:15:8-28
>                              (and originally defined in ?GHC.Base?)
>
> XMonad/Actions/Volume.hs:225:58:
>     Ambiguous occurrence ?<*?
>
>     It could refer to either ?XMonad.Actions.Volume.<*?,
>                              defined at XMonad/Actions/Volume.hs:66:4
>                           or ?Prelude.<*?,
>                              imported from ?Prelude? at
> XMonad/Actions/Volume.hs:15:8-28
>                              (and originally defined in ?GHC.Base?)
> cabal: Error: some packages failed to install:
> xmonad-extras-0.12 failed during the building phase. The exception was:
> ExitFailure 1
>
>
> I got to look at the log but it just has what i pasted above. System is
> Arch 3.19.2-1-ARCH
>
> Any input is appreciated.
> Thanks
> dave
> _______________________________________________
> xmonad mailing list
> xmonad at haskell.org
> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150409/f84d9024/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Dave Macias
Thanks for responding Brent.

Not very good at haskell myself.
Im looking at the XMonad.Actions.Volume and there i find:

infixl 1 <*
(<*) :: Monad m => m a -> m b -> m a
pa <* pb = pa >>= \a -> pb >> return a

I'm assuming this is what you were referring to for solution (1). I've
 been trying to play with it but i get mixed errors when building, how do i
rename?
Here is the code just in case im looking at it wrong:
https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs

I also plan to email the maintainer, but i would like to have this work for
educational purposes.

Thanks,
Dave

On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com> wrote:

> It looks like XMonad.Actions.Volume defines an operator (<*), but as of
> base-4.8 an operator with that name has been added to the Prelude.  The fix
> would be to either (1) rename the operator in XMonad.Actions.Volume, or (2)
> hide the operator from Prelude and tell everyone who wants to use
> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>
> xmonad-extras is not officially a part of the xmonad project; you should
> contact the maintainers listed at
> http://hackage.haskell.org/package/xmonad-extras .
>
> -Brent
>
> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>
>> This is my first time posting here so i hope im doing this right.
>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib, and
>> xmobar.
>> I also use xmonad-extras but it failed during the build. I tried using
>> cabal and also from source but both give same output:
>>
>> $ cabal install xmonad-extras
>>
>> Resolving dependencies...
>> Configuring xmonad-extras-0.12...
>> Building xmonad-extras-0.12...
>> Failed to install xmonad-extras-0.12
>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>> Configuring xmonad-extras-0.12...
>> Building xmonad-extras-0.12...
>> Preprocessing library xmonad-extras-0.12...
>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>> XMonad/Util/WindowPropertiesRE.hs,
>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>> dist/build/XMonad/Actions/Volume.o )
>>
>> XMonad/Actions/Volume.hs:173:23:
>>     Ambiguous occurrence ?<*?
>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>                              defined at XMonad/Actions/Volume.hs:66:4
>>                           or ?Prelude.<*?,
>>                              imported from ?Prelude? at
>> XMonad/Actions/Volume.hs:15:8-28
>>                              (and originally defined in ?GHC.Base?)
>>
>> XMonad/Actions/Volume.hs:173:43:
>>     Ambiguous occurrence ?<*?
>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>                              defined at XMonad/Actions/Volume.hs:66:4
>>                           or ?Prelude.<*?,
>>                              imported from ?Prelude? at
>> XMonad/Actions/Volume.hs:15:8-28
>>                              (and originally defined in ?GHC.Base?)
>>
>> XMonad/Actions/Volume.hs:200:62:
>>     Ambiguous occurrence ?<*?
>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>                              defined at XMonad/Actions/Volume.hs:66:4
>>                           or ?Prelude.<*?,
>>                              imported from ?Prelude? at
>> XMonad/Actions/Volume.hs:15:8-28
>>                              (and originally defined in ?GHC.Base?)
>>
>> XMonad/Actions/Volume.hs:215:32:
>>     Ambiguous occurrence ?<*?
>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>                              defined at XMonad/Actions/Volume.hs:66:4
>>                           or ?Prelude.<*?,
>>                              imported from ?Prelude? at
>> XMonad/Actions/Volume.hs:15:8-28
>>                              (and originally defined in ?GHC.Base?)
>>
>> XMonad/Actions/Volume.hs:225:58:
>>     Ambiguous occurrence ?<*?
>>
>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>                              defined at XMonad/Actions/Volume.hs:66:4
>>                           or ?Prelude.<*?,
>>                              imported from ?Prelude? at
>> XMonad/Actions/Volume.hs:15:8-28
>>                              (and originally defined in ?GHC.Base?)
>> cabal: Error: some packages failed to install:
>> xmonad-extras-0.12 failed during the building phase. The exception was:
>> ExitFailure 1
>>
>>
>> I got to look at the log but it just has what i pasted above. System is
>> Arch 3.19.2-1-ARCH
>>
>> Any input is appreciated.
>> Thanks
>> dave
>> _______________________________________________
>> xmonad mailing list
>> xmonad at haskell.org
>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150409/8204f4d2/attachment-0001.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Carlos López Camey
Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
Applicative. I think Applicative is a super class of Monad in newer GHC and
is now included in the Prelude. So, I believe it would be safe to just
remove it.

*
https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a

Cheers

2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:

> Thanks for responding Brent.
>
> Not very good at haskell myself.
> Im looking at the XMonad.Actions.Volume and there i find:
>
> infixl 1 <*
> (<*) :: Monad m => m a -> m b -> m a
> pa <* pb = pa >>= \a -> pb >> return a
>
> I'm assuming this is what you were referring to for solution (1). I've
>  been trying to play with it but i get mixed errors when building, how do i
> rename?
> Here is the code just in case im looking at it wrong:
>
> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>
> I also plan to email the maintainer, but i would like to have this work
> for educational purposes.
>
> Thanks,
> Dave
>
> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com> wrote:
>
>> It looks like XMonad.Actions.Volume defines an operator (<*), but as of
>> base-4.8 an operator with that name has been added to the Prelude.  The fix
>> would be to either (1) rename the operator in XMonad.Actions.Volume, or (2)
>> hide the operator from Prelude and tell everyone who wants to use
>> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>>
>> xmonad-extras is not officially a part of the xmonad project; you should
>> contact the maintainers listed at
>> http://hackage.haskell.org/package/xmonad-extras .
>>
>> -Brent
>>
>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>>
>>> This is my first time posting here so i hope im doing this right.
>>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib,
>>> and xmobar.
>>> I also use xmonad-extras but it failed during the build. I tried using
>>> cabal and also from source but both give same output:
>>>
>>> $ cabal install xmonad-extras
>>>
>>> Resolving dependencies...
>>> Configuring xmonad-extras-0.12...
>>> Building xmonad-extras-0.12...
>>> Failed to install xmonad-extras-0.12
>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>> Configuring xmonad-extras-0.12...
>>> Building xmonad-extras-0.12...
>>> Preprocessing library xmonad-extras-0.12...
>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>> XMonad/Util/WindowPropertiesRE.hs,
>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>>> dist/build/XMonad/Actions/Volume.o )
>>>
>>> XMonad/Actions/Volume.hs:173:23:
>>>     Ambiguous occurrence ?<*?
>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>                           or ?Prelude.<*?,
>>>                              imported from ?Prelude? at
>>> XMonad/Actions/Volume.hs:15:8-28
>>>                              (and originally defined in ?GHC.Base?)
>>>
>>> XMonad/Actions/Volume.hs:173:43:
>>>     Ambiguous occurrence ?<*?
>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>                           or ?Prelude.<*?,
>>>                              imported from ?Prelude? at
>>> XMonad/Actions/Volume.hs:15:8-28
>>>                              (and originally defined in ?GHC.Base?)
>>>
>>> XMonad/Actions/Volume.hs:200:62:
>>>     Ambiguous occurrence ?<*?
>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>                           or ?Prelude.<*?,
>>>                              imported from ?Prelude? at
>>> XMonad/Actions/Volume.hs:15:8-28
>>>                              (and originally defined in ?GHC.Base?)
>>>
>>> XMonad/Actions/Volume.hs:215:32:
>>>     Ambiguous occurrence ?<*?
>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>                           or ?Prelude.<*?,
>>>                              imported from ?Prelude? at
>>> XMonad/Actions/Volume.hs:15:8-28
>>>                              (and originally defined in ?GHC.Base?)
>>>
>>> XMonad/Actions/Volume.hs:225:58:
>>>     Ambiguous occurrence ?<*?
>>>
>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>                           or ?Prelude.<*?,
>>>                              imported from ?Prelude? at
>>> XMonad/Actions/Volume.hs:15:8-28
>>>                              (and originally defined in ?GHC.Base?)
>>> cabal: Error: some packages failed to install:
>>> xmonad-extras-0.12 failed during the building phase. The exception was:
>>> ExitFailure 1
>>>
>>>
>>> I got to look at the log but it just has what i pasted above. System is
>>> Arch 3.19.2-1-ARCH
>>>
>>> Any input is appreciated.
>>> Thanks
>>> dave
>>> _______________________________________________
>>> xmonad mailing list
>>> xmonad at haskell.org
>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>
>>
>
> _______________________________________________
> xmonad mailing list
> xmonad at haskell.org
> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150409/ab89bcec/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Adam Vogt
Hi.

The fixity is different (infixl 1 not infixl 4) so using the one from
control.applicative means some parentheses have to be added.

Regards,
Assam
On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net> wrote:

> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
> Applicative. I think Applicative is a super class of Monad in newer GHC and
> is now included in the Prelude. So, I believe it would be safe to just
> remove it.
>
> *
> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>
> Cheers
>
> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>
>> Thanks for responding Brent.
>>
>> Not very good at haskell myself.
>> Im looking at the XMonad.Actions.Volume and there i find:
>>
>> infixl 1 <*
>> (<*) :: Monad m => m a -> m b -> m a
>> pa <* pb = pa >>= \a -> pb >> return a
>>
>> I'm assuming this is what you were referring to for solution (1). I've
>>  been trying to play with it but i get mixed errors when building, how do i
>> rename?
>> Here is the code just in case im looking at it wrong:
>>
>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>
>> I also plan to email the maintainer, but i would like to have this work
>> for educational purposes.
>>
>> Thanks,
>> Dave
>>
>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com> wrote:
>>
>>> It looks like XMonad.Actions.Volume defines an operator (<*), but as of
>>> base-4.8 an operator with that name has been added to the Prelude.  The fix
>>> would be to either (1) rename the operator in XMonad.Actions.Volume, or (2)
>>> hide the operator from Prelude and tell everyone who wants to use
>>> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>>>
>>> xmonad-extras is not officially a part of the xmonad project; you should
>>> contact the maintainers listed at
>>> http://hackage.haskell.org/package/xmonad-extras .
>>>
>>> -Brent
>>>
>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>>>
>>>> This is my first time posting here so i hope im doing this right.
>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib,
>>>> and xmobar.
>>>> I also use xmonad-extras but it failed during the build. I tried using
>>>> cabal and also from source but both give same output:
>>>>
>>>> $ cabal install xmonad-extras
>>>>
>>>> Resolving dependencies...
>>>> Configuring xmonad-extras-0.12...
>>>> Building xmonad-extras-0.12...
>>>> Failed to install xmonad-extras-0.12
>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>> Configuring xmonad-extras-0.12...
>>>> Building xmonad-extras-0.12...
>>>> Preprocessing library xmonad-extras-0.12...
>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>>>> dist/build/XMonad/Actions/Volume.o )
>>>>
>>>> XMonad/Actions/Volume.hs:173:23:
>>>>     Ambiguous occurrence ?<*?
>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>                           or ?Prelude.<*?,
>>>>                              imported from ?Prelude? at
>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>                              (and originally defined in ?GHC.Base?)
>>>>
>>>> XMonad/Actions/Volume.hs:173:43:
>>>>     Ambiguous occurrence ?<*?
>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>                           or ?Prelude.<*?,
>>>>                              imported from ?Prelude? at
>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>                              (and originally defined in ?GHC.Base?)
>>>>
>>>> XMonad/Actions/Volume.hs:200:62:
>>>>     Ambiguous occurrence ?<*?
>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>                           or ?Prelude.<*?,
>>>>                              imported from ?Prelude? at
>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>                              (and originally defined in ?GHC.Base?)
>>>>
>>>> XMonad/Actions/Volume.hs:215:32:
>>>>     Ambiguous occurrence ?<*?
>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>                           or ?Prelude.<*?,
>>>>                              imported from ?Prelude? at
>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>                              (and originally defined in ?GHC.Base?)
>>>>
>>>> XMonad/Actions/Volume.hs:225:58:
>>>>     Ambiguous occurrence ?<*?
>>>>
>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>                           or ?Prelude.<*?,
>>>>                              imported from ?Prelude? at
>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>                              (and originally defined in ?GHC.Base?)
>>>> cabal: Error: some packages failed to install:
>>>> xmonad-extras-0.12 failed during the building phase. The exception was:
>>>> ExitFailure 1
>>>>
>>>>
>>>> I got to look at the log but it just has what i pasted above. System is
>>>> Arch 3.19.2-1-ARCH
>>>>
>>>> Any input is appreciated.
>>>> Thanks
>>>> dave
>>>> _______________________________________________
>>>> xmonad mailing list
>>>> xmonad at haskell.org
>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>
>>>
>>
>> _______________________________________________
>> xmonad mailing list
>> xmonad at haskell.org
>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>
>>
>
> _______________________________________________
> xmonad mailing list
> xmonad at haskell.org
> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150410/21603842/attachment-0001.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Dave Macias
Thank you all for the replies.
I've tried removing it by simply commenting it out, but no change.
Assam, where would the parentheses go? I've fiddled with it but dont know
where. This is the block of code that i assume you are referring to:
XMonad.Actions.Volume
infixl 1 <*
(<*) :: Monad m => m a -> m b -> m a
pa <* pb = pa >>= \a -> pb >> return a

Thanks again
Dave


On Fri, Apr 10, 2015 at 12:35 AM, adam vogt <vogt.adam at gmail.com> wrote:

> Hi.
>
> The fixity is different (infixl 1 not infixl 4) so using the one from
> control.applicative means some parentheses have to be added.
>
> Regards,
> Assam
> On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net> wrote:
>
>> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
>> Applicative. I think Applicative is a super class of Monad in newer GHC and
>> is now included in the Prelude. So, I believe it would be safe to just
>> remove it.
>>
>> *
>> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>>
>> Cheers
>>
>> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>>
>>> Thanks for responding Brent.
>>>
>>> Not very good at haskell myself.
>>> Im looking at the XMonad.Actions.Volume and there i find:
>>>
>>> infixl 1 <*
>>> (<*) :: Monad m => m a -> m b -> m a
>>> pa <* pb = pa >>= \a -> pb >> return a
>>>
>>> I'm assuming this is what you were referring to for solution (1). I've
>>>  been trying to play with it but i get mixed errors when building, how do i
>>> rename?
>>> Here is the code just in case im looking at it wrong:
>>>
>>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>>
>>> I also plan to email the maintainer, but i would like to have this work
>>> for educational purposes.
>>>
>>> Thanks,
>>> Dave
>>>
>>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com> wrote:
>>>
>>>> It looks like XMonad.Actions.Volume defines an operator (<*), but as
>>>> of base-4.8 an operator with that name has been added to the Prelude.  The
>>>> fix would be to either (1) rename the operator in XMonad.Actions.Volume, or
>>>> (2) hide the operator from Prelude and tell everyone who wants to use
>>>> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>>>>
>>>> xmonad-extras is not officially a part of the xmonad project; you
>>>> should contact the maintainers listed at
>>>> http://hackage.haskell.org/package/xmonad-extras .
>>>>
>>>> -Brent
>>>>
>>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>>>>
>>>>> This is my first time posting here so i hope im doing this right.
>>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib,
>>>>> and xmobar.
>>>>> I also use xmonad-extras but it failed during the build. I tried using
>>>>> cabal and also from source but both give same output:
>>>>>
>>>>> $ cabal install xmonad-extras
>>>>>
>>>>> Resolving dependencies...
>>>>> Configuring xmonad-extras-0.12...
>>>>> Building xmonad-extras-0.12...
>>>>> Failed to install xmonad-extras-0.12
>>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>>> Configuring xmonad-extras-0.12...
>>>>> Building xmonad-extras-0.12...
>>>>> Preprocessing library xmonad-extras-0.12...
>>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>>>>> dist/build/XMonad/Actions/Volume.o )
>>>>>
>>>>> XMonad/Actions/Volume.hs:173:23:
>>>>>     Ambiguous occurrence ?<*?
>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>                           or ?Prelude.<*?,
>>>>>                              imported from ?Prelude? at
>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>
>>>>> XMonad/Actions/Volume.hs:173:43:
>>>>>     Ambiguous occurrence ?<*?
>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>                           or ?Prelude.<*?,
>>>>>                              imported from ?Prelude? at
>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>
>>>>> XMonad/Actions/Volume.hs:200:62:
>>>>>     Ambiguous occurrence ?<*?
>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>                           or ?Prelude.<*?,
>>>>>                              imported from ?Prelude? at
>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>
>>>>> XMonad/Actions/Volume.hs:215:32:
>>>>>     Ambiguous occurrence ?<*?
>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>                           or ?Prelude.<*?,
>>>>>                              imported from ?Prelude? at
>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>
>>>>> XMonad/Actions/Volume.hs:225:58:
>>>>>     Ambiguous occurrence ?<*?
>>>>>
>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>                           or ?Prelude.<*?,
>>>>>                              imported from ?Prelude? at
>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>                              (and originally defined in ?GHC.Base?)
>>>>> cabal: Error: some packages failed to install:
>>>>> xmonad-extras-0.12 failed during the building phase. The exception was:
>>>>> ExitFailure 1
>>>>>
>>>>>
>>>>> I got to look at the log but it just has what i pasted above. System
>>>>> is Arch 3.19.2-1-ARCH
>>>>>
>>>>> Any input is appreciated.
>>>>> Thanks
>>>>> dave
>>>>> _______________________________________________
>>>>> xmonad mailing list
>>>>> xmonad at haskell.org
>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> xmonad mailing list
>>> xmonad at haskell.org
>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>
>>>
>>
>> _______________________________________________
>> xmonad mailing list
>> xmonad at haskell.org
>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150414/a4e70143/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Adam Vogt
I mean an expression like:

> headerLine >> playbackChannels >>= volumes <* eof

needs parentheses like:

(headerLine >> playbackChannels >>= volumes) <* eof

if we were to use the inflxl 4 <*

On Tue, Apr 14, 2015 at 8:15 AM, Dave Macias <davama at gmail.com> wrote:

> Thank you all for the replies.
> I've tried removing it by simply commenting it out, but no change.
> Assam, where would the parentheses go? I've fiddled with it but dont know
> where. This is the block of code that i assume you are referring to:
> XMonad.Actions.Volume
> infixl 1 <*
> (<*) :: Monad m => m a -> m b -> m a
> pa <* pb = pa >>= \a -> pb >> return a
>
> Thanks again
> Dave
>
>
> On Fri, Apr 10, 2015 at 12:35 AM, adam vogt <vogt.adam at gmail.com> wrote:
>
>> Hi.
>>
>> The fixity is different (infixl 1 not infixl 4) so using the one from
>> control.applicative means some parentheses have to be added.
>>
>> Regards,
>> Assam
>> On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net> wrote:
>>
>>> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
>>> Applicative. I think Applicative is a super class of Monad in newer GHC and
>>> is now included in the Prelude. So, I believe it would be safe to just
>>> remove it.
>>>
>>> *
>>> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>>>
>>> Cheers
>>>
>>> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>>>
>>>> Thanks for responding Brent.
>>>>
>>>> Not very good at haskell myself.
>>>> Im looking at the XMonad.Actions.Volume and there i find:
>>>>
>>>> infixl 1 <*
>>>> (<*) :: Monad m => m a -> m b -> m a
>>>> pa <* pb = pa >>= \a -> pb >> return a
>>>>
>>>> I'm assuming this is what you were referring to for solution (1). I've
>>>>  been trying to play with it but i get mixed errors when building, how do i
>>>> rename?
>>>> Here is the code just in case im looking at it wrong:
>>>>
>>>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>>>
>>>> I also plan to email the maintainer, but i would like to have this work
>>>> for educational purposes.
>>>>
>>>> Thanks,
>>>> Dave
>>>>
>>>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com>
>>>> wrote:
>>>>
>>>>> It looks like XMonad.Actions.Volume defines an operator (<*), but as
>>>>> of base-4.8 an operator with that name has been added to the Prelude.  The
>>>>> fix would be to either (1) rename the operator in XMonad.Actions.Volume, or
>>>>> (2) hide the operator from Prelude and tell everyone who wants to use
>>>>> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>>>>>
>>>>> xmonad-extras is not officially a part of the xmonad project; you
>>>>> should contact the maintainers listed at
>>>>> http://hackage.haskell.org/package/xmonad-extras .
>>>>>
>>>>> -Brent
>>>>>
>>>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>>>>>
>>>>>> This is my first time posting here so i hope im doing this right.
>>>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib,
>>>>>> and xmobar.
>>>>>> I also use xmonad-extras but it failed during the build. I tried
>>>>>> using cabal and also from source but both give same output:
>>>>>>
>>>>>> $ cabal install xmonad-extras
>>>>>>
>>>>>> Resolving dependencies...
>>>>>> Configuring xmonad-extras-0.12...
>>>>>> Building xmonad-extras-0.12...
>>>>>> Failed to install xmonad-extras-0.12
>>>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>>>> Configuring xmonad-extras-0.12...
>>>>>> Building xmonad-extras-0.12...
>>>>>> Preprocessing library xmonad-extras-0.12...
>>>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>>>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>>>>>> dist/build/XMonad/Actions/Volume.o )
>>>>>>
>>>>>> XMonad/Actions/Volume.hs:173:23:
>>>>>>     Ambiguous occurrence ?<*?
>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>                           or ?Prelude.<*?,
>>>>>>                              imported from ?Prelude? at
>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>
>>>>>> XMonad/Actions/Volume.hs:173:43:
>>>>>>     Ambiguous occurrence ?<*?
>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>                           or ?Prelude.<*?,
>>>>>>                              imported from ?Prelude? at
>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>
>>>>>> XMonad/Actions/Volume.hs:200:62:
>>>>>>     Ambiguous occurrence ?<*?
>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>                           or ?Prelude.<*?,
>>>>>>                              imported from ?Prelude? at
>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>
>>>>>> XMonad/Actions/Volume.hs:215:32:
>>>>>>     Ambiguous occurrence ?<*?
>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>                           or ?Prelude.<*?,
>>>>>>                              imported from ?Prelude? at
>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>
>>>>>> XMonad/Actions/Volume.hs:225:58:
>>>>>>     Ambiguous occurrence ?<*?
>>>>>>
>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>                           or ?Prelude.<*?,
>>>>>>                              imported from ?Prelude? at
>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>> cabal: Error: some packages failed to install:
>>>>>> xmonad-extras-0.12 failed during the building phase. The exception
>>>>>> was:
>>>>>> ExitFailure 1
>>>>>>
>>>>>>
>>>>>> I got to look at the log but it just has what i pasted above. System
>>>>>> is Arch 3.19.2-1-ARCH
>>>>>>
>>>>>> Any input is appreciated.
>>>>>> Thanks
>>>>>> dave
>>>>>> _______________________________________________
>>>>>> xmonad mailing list
>>>>>> xmonad at haskell.org
>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> xmonad mailing list
>>>> xmonad at haskell.org
>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>
>>>>
>>>
>>> _______________________________________________
>>> xmonad mailing list
>>> xmonad at haskell.org
>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150414/8e019a2f/attachment-0001.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Dave Macias
Looks like maintainer updated the package.

Do i have to do anything to close this?




Thanks all for support

Dave



?
Sent from iPhone

On Tue, Apr 14, 2015 at 2:24 PM, adam vogt <vogt.adam at gmail.com> wrote:

> I mean an expression like:
>> headerLine >> playbackChannels >>= volumes <* eof
> needs parentheses like:
> (headerLine >> playbackChannels >>= volumes) <* eof
> if we were to use the inflxl 4 <*
> On Tue, Apr 14, 2015 at 8:15 AM, Dave Macias <davama at gmail.com> wrote:
>> Thank you all for the replies.
>> I've tried removing it by simply commenting it out, but no change.
>> Assam, where would the parentheses go? I've fiddled with it but dont know
>> where. This is the block of code that i assume you are referring to:
>> XMonad.Actions.Volume
>> infixl 1 <*
>> (<*) :: Monad m => m a -> m b -> m a
>> pa <* pb = pa >>= \a -> pb >> return a
>>
>> Thanks again
>> Dave
>>
>>
>> On Fri, Apr 10, 2015 at 12:35 AM, adam vogt <vogt.adam at gmail.com> wrote:
>>
>>> Hi.
>>>
>>> The fixity is different (infixl 1 not infixl 4) so using the one from
>>> control.applicative means some parentheses have to be added.
>>>
>>> Regards,
>>> Assam
>>> On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net> wrote:
>>>
>>>> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
>>>> Applicative. I think Applicative is a super class of Monad in newer GHC and
>>>> is now included in the Prelude. So, I believe it would be safe to just
>>>> remove it.
>>>>
>>>> *
>>>> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>>>>
>>>> Cheers
>>>>
>>>> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>>>>
>>>>> Thanks for responding Brent.
>>>>>
>>>>> Not very good at haskell myself.
>>>>> Im looking at the XMonad.Actions.Volume and there i find:
>>>>>
>>>>> infixl 1 <*
>>>>> (<*) :: Monad m => m a -> m b -> m a
>>>>> pa <* pb = pa >>= \a -> pb >> return a
>>>>>
>>>>> I'm assuming this is what you were referring to for solution (1). I've
>>>>>  been trying to play with it but i get mixed errors when building, how do i
>>>>> rename?
>>>>> Here is the code just in case im looking at it wrong:
>>>>>
>>>>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>>>>
>>>>> I also plan to email the maintainer, but i would like to have this work
>>>>> for educational purposes.
>>>>>
>>>>> Thanks,
>>>>> Dave
>>>>>
>>>>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> It looks like XMonad.Actions.Volume defines an operator (<*), but as
>>>>>> of base-4.8 an operator with that name has been added to the Prelude.  The
>>>>>> fix would be to either (1) rename the operator in XMonad.Actions.Volume, or
>>>>>> (2) hide the operator from Prelude and tell everyone who wants to use
>>>>>> XMonad.Actions.Volume.(<*) that they need to hide it from Prelude too.
>>>>>>
>>>>>> xmonad-extras is not officially a part of the xmonad project; you
>>>>>> should contact the maintainers listed at
>>>>>> http://hackage.haskell.org/package/xmonad-extras .
>>>>>>
>>>>>> -Brent
>>>>>>
>>>>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com> wrote:
>>>>>>
>>>>>>> This is my first time posting here so i hope im doing this right.
>>>>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib,
>>>>>>> and xmobar.
>>>>>>> I also use xmonad-extras but it failed during the build. I tried
>>>>>>> using cabal and also from source but both give same output:
>>>>>>>
>>>>>>> $ cabal install xmonad-extras
>>>>>>>
>>>>>>> Resolving dependencies...
>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>> Building xmonad-extras-0.12...
>>>>>>> Failed to install xmonad-extras-0.12
>>>>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>> Building xmonad-extras-0.12...
>>>>>>> Preprocessing library xmonad-extras-0.12...
>>>>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>>>>> [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs,
>>>>>>> dist/build/XMonad/Actions/Volume.o )
>>>>>>>
>>>>>>> XMonad/Actions/Volume.hs:173:23:
>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>>                           or ?Prelude.<*?,
>>>>>>>                              imported from ?Prelude? at
>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>
>>>>>>> XMonad/Actions/Volume.hs:173:43:
>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>>                           or ?Prelude.<*?,
>>>>>>>                              imported from ?Prelude? at
>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>
>>>>>>> XMonad/Actions/Volume.hs:200:62:
>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>>                           or ?Prelude.<*?,
>>>>>>>                              imported from ?Prelude? at
>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>
>>>>>>> XMonad/Actions/Volume.hs:215:32:
>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>>                           or ?Prelude.<*?,
>>>>>>>                              imported from ?Prelude? at
>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>
>>>>>>> XMonad/Actions/Volume.hs:225:58:
>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>
>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>                              defined at XMonad/Actions/Volume.hs:66:4
>>>>>>>                           or ?Prelude.<*?,
>>>>>>>                              imported from ?Prelude? at
>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>> cabal: Error: some packages failed to install:
>>>>>>> xmonad-extras-0.12 failed during the building phase. The exception
>>>>>>> was:
>>>>>>> ExitFailure 1
>>>>>>>
>>>>>>>
>>>>>>> I got to look at the log but it just has what i pasted above. System
>>>>>>> is Arch 3.19.2-1-ARCH
>>>>>>>
>>>>>>> Any input is appreciated.
>>>>>>> Thanks
>>>>>>> dave
>>>>>>> _______________________________________________
>>>>>>> xmonad mailing list
>>>>>>> xmonad at haskell.org
>>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> xmonad mailing list
>>>>> xmonad at haskell.org
>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> xmonad mailing list
>>>> xmonad at haskell.org
>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150414/eb0f0c85/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Brent Yorgey
Did you actually open a ticket on the issue tracker?  Or just send a
message to the mailing list? If the latter, there's nothing more you need
to do.

-Brent

On Tue, Apr 14, 2015 at 5:21 PM <davama at gmail.com> wrote:

> Looks like maintainer updated the package.
> Do i have to do anything to close this?
>
> Thanks all for support
> Dave
>
> ?
> Sent from iPhone
>
>
> On Tue, Apr 14, 2015 at 2:24 PM, adam vogt <vogt.adam at gmail.com> wrote:
>
>>  I mean an expression like:
>>
>> > headerLine >> playbackChannels >>= volumes <* eof
>>
>> needs parentheses like:
>>
>> (headerLine >> playbackChannels >>= volumes) <* eof
>>
>> if we were to use the inflxl 4 <*
>>
>> On Tue, Apr 14, 2015 at 8:15 AM, Dave Macias <davama at gmail.com> wrote:
>>
>>> Thank you all for the replies.
>>> I've tried removing it by simply commenting it out, but no change.
>>> Assam, where would the parentheses go? I've fiddled with it but dont
>>> know where. This is the block of code that i assume you are referring to:
>>>  XMonad.Actions.Volume
>>> infixl 1 <*
>>> (<*) :: Monad m => m a -> m b -> m a
>>> pa <* pb = pa >>= \a -> pb >> return a
>>>
>>> Thanks again
>>> Dave
>>>
>>>
>>> On Fri, Apr 10, 2015 at 12:35 AM, adam vogt <vogt.adam at gmail.com> wrote:
>>>
>>>> Hi.
>>>>
>>>> The fixity is different (infixl 1 not infixl 4) so using the one from
>>>> control.applicative means some parentheses have to be added.
>>>>
>>>> Regards,
>>>> Assam
>>>>  On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net>
>>>> wrote:
>>>>
>>>>> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
>>>>> Applicative. I think Applicative is a super class of Monad in newer GHC and
>>>>> is now included in the Prelude. So, I believe it would be safe to just
>>>>> remove it.
>>>>>
>>>>> *
>>>>> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>>>>>
>>>>> Cheers
>>>>>
>>>>> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>>>>>
>>>>>> Thanks for responding Brent.
>>>>>>
>>>>>> Not very good at haskell myself.
>>>>>> Im looking at the XMonad.Actions.Volume and there i find:
>>>>>>
>>>>>> infixl 1 <*
>>>>>> (<*) :: Monad m => m a -> m b -> m a
>>>>>> pa <* pb = pa >>= \a -> pb >> return a
>>>>>>
>>>>>> I'm assuming this is what you were referring to for solution (1).
>>>>>> I've  been trying to play with it but i get mixed errors when building, how
>>>>>> do i rename?
>>>>>> Here is the code just in case im looking at it wrong:
>>>>>>
>>>>>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>>>>>
>>>>>> I also plan to email the maintainer, but i would like to have this
>>>>>> work for educational purposes.
>>>>>>
>>>>>> Thanks,
>>>>>> Dave
>>>>>>
>>>>>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> It looks like XMonad.Actions.Volume defines an operator (<*), but
>>>>>>> as of base-4.8 an operator with that name has been added to the Prelude.
>>>>>>> The fix would be to either (1) rename the operator in
>>>>>>> XMonad.Actions.Volume, or (2) hide the operator from Prelude and tell
>>>>>>> everyone who wants to use XMonad.Actions.Volume.(<*) that they need to hide
>>>>>>> it from Prelude too.
>>>>>>>
>>>>>>>  xmonad-extras is not officially a part of the xmonad project; you
>>>>>>> should contact the maintainers listed at
>>>>>>> http://hackage.haskell.org/package/xmonad-extras .
>>>>>>>
>>>>>>> -Brent
>>>>>>>
>>>>>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> This is my first time posting here so i hope im doing this right.
>>>>>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad,
>>>>>>>> xmonad-contrib, and xmobar.
>>>>>>>> I also use xmonad-extras but it failed during the build. I tried
>>>>>>>> using cabal and also from source but both give same output:
>>>>>>>>
>>>>>>>> $ cabal install xmonad-extras
>>>>>>>>
>>>>>>>> Resolving dependencies...
>>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>>> Building xmonad-extras-0.12...
>>>>>>>> Failed to install xmonad-extras-0.12
>>>>>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>>> Building xmonad-extras-0.12...
>>>>>>>> Preprocessing library xmonad-extras-0.12...
>>>>>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>>>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>>>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>>>>>> [2 of 2] Compiling XMonad.Actions.Volume (
>>>>>>>> XMonad/Actions/Volume.hs, dist/build/XMonad/Actions/Volume.o )
>>>>>>>>
>>>>>>>> XMonad/Actions/Volume.hs:173:23:
>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>                              defined at
>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>                              imported from ?Prelude? at
>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>
>>>>>>>> XMonad/Actions/Volume.hs:173:43:
>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>                              defined at
>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>                              imported from ?Prelude? at
>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>
>>>>>>>> XMonad/Actions/Volume.hs:200:62:
>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>                              defined at
>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>                              imported from ?Prelude? at
>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>
>>>>>>>> XMonad/Actions/Volume.hs:215:32:
>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>                              defined at
>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>                              imported from ?Prelude? at
>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>
>>>>>>>> XMonad/Actions/Volume.hs:225:58:
>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>
>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>                              defined at
>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>                              imported from ?Prelude? at
>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>> cabal: Error: some packages failed to install:
>>>>>>>> xmonad-extras-0.12 failed during the building phase. The exception
>>>>>>>> was:
>>>>>>>> ExitFailure 1
>>>>>>>>
>>>>>>>>
>>>>>>>> I got to look at the log but it just has what i pasted above.
>>>>>>>> System is Arch 3.19.2-1-ARCH
>>>>>>>>
>>>>>>>> Any input is appreciated.
>>>>>>>> Thanks
>>>>>>>> dave
>>>>>>>>  _______________________________________________
>>>>>>>> xmonad mailing list
>>>>>>>> xmonad at haskell.org
>>>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> xmonad mailing list
>>>>>> xmonad at haskell.org
>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> xmonad mailing list
>>>>> xmonad at haskell.org
>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>
>>>>>
>>>
>>
> _______________________________________________
> xmonad mailing list
> xmonad at haskell.org
> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150415/75815a71/attachment.html>

Reply | Threaded
Open this post in threaded view
|

xmonad: xmonad-extras 0.12 fails to build

Dave Macias
I just sent an email. Thanks!




Dave



?
Sent from iPhone

On Wed, Apr 15, 2015 at 1:14 PM, Brent Yorgey <byorgey at gmail.com> wrote:

> Did you actually open a ticket on the issue tracker?  Or just send a
> message to the mailing list? If the latter, there's nothing more you need
> to do.
> -Brent
> On Tue, Apr 14, 2015 at 5:21 PM <davama at gmail.com> wrote:
>> Looks like maintainer updated the package.
>> Do i have to do anything to close this?
>>
>> Thanks all for support
>> Dave
>>
>> ?
>> Sent from iPhone
>>
>>
>> On Tue, Apr 14, 2015 at 2:24 PM, adam vogt <vogt.adam at gmail.com> wrote:
>>
>>>  I mean an expression like:
>>>
>>> > headerLine >> playbackChannels >>= volumes <* eof
>>>
>>> needs parentheses like:
>>>
>>> (headerLine >> playbackChannels >>= volumes) <* eof
>>>
>>> if we were to use the inflxl 4 <*
>>>
>>> On Tue, Apr 14, 2015 at 8:15 AM, Dave Macias <davama at gmail.com> wrote:
>>>
>>>> Thank you all for the replies.
>>>> I've tried removing it by simply commenting it out, but no change.
>>>> Assam, where would the parentheses go? I've fiddled with it but dont
>>>> know where. This is the block of code that i assume you are referring to:
>>>>  XMonad.Actions.Volume
>>>> infixl 1 <*
>>>> (<*) :: Monad m => m a -> m b -> m a
>>>> pa <* pb = pa >>= \a -> pb >> return a
>>>>
>>>> Thanks again
>>>> Dave
>>>>
>>>>
>>>> On Fri, Apr 10, 2015 at 12:35 AM, adam vogt <vogt.adam at gmail.com> wrote:
>>>>
>>>>> Hi.
>>>>>
>>>>> The fixity is different (infixl 1 not infixl 4) so using the one from
>>>>> control.applicative means some parentheses have to be added.
>>>>>
>>>>> Regards,
>>>>> Assam
>>>>>  On Apr 10, 2015 12:16 AM, "Carlos L?pez-Camey" <c.lopez at kmels.net>
>>>>> wrote:
>>>>>
>>>>>> Hi Dave, by the results of hoogle *, it looks like (<*) is defined in
>>>>>> Applicative. I think Applicative is a super class of Monad in newer GHC and
>>>>>> is now included in the Prelude. So, I believe it would be safe to just
>>>>>> remove it.
>>>>>>
>>>>>> *
>>>>>> https://www.haskell.org/hoogle/?hoogle=Monad+m+%3D%3E+m+a+-%3E+m+b+-%3E+m+a
>>>>>>
>>>>>> Cheers
>>>>>>
>>>>>> 2015-04-09 21:55 GMT-06:00 Dave Macias <davama at gmail.com>:
>>>>>>
>>>>>>> Thanks for responding Brent.
>>>>>>>
>>>>>>> Not very good at haskell myself.
>>>>>>> Im looking at the XMonad.Actions.Volume and there i find:
>>>>>>>
>>>>>>> infixl 1 <*
>>>>>>> (<*) :: Monad m => m a -> m b -> m a
>>>>>>> pa <* pb = pa >>= \a -> pb >> return a
>>>>>>>
>>>>>>> I'm assuming this is what you were referring to for solution (1).
>>>>>>> I've  been trying to play with it but i get mixed errors when building, how
>>>>>>> do i rename?
>>>>>>> Here is the code just in case im looking at it wrong:
>>>>>>>
>>>>>>> https://hackage.haskell.org/package/xmonad-extras-0.12/src/XMonad/Actions/Volume.hs
>>>>>>>
>>>>>>> I also plan to email the maintainer, but i would like to have this
>>>>>>> work for educational purposes.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Dave
>>>>>>>
>>>>>>> On Thu, Apr 9, 2015 at 10:04 AM, Brent Yorgey <byorgey at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> It looks like XMonad.Actions.Volume defines an operator (<*), but
>>>>>>>> as of base-4.8 an operator with that name has been added to the Prelude.
>>>>>>>> The fix would be to either (1) rename the operator in
>>>>>>>> XMonad.Actions.Volume, or (2) hide the operator from Prelude and tell
>>>>>>>> everyone who wants to use XMonad.Actions.Volume.(<*) that they need to hide
>>>>>>>> it from Prelude too.
>>>>>>>>
>>>>>>>>  xmonad-extras is not officially a part of the xmonad project; you
>>>>>>>> should contact the maintainers listed at
>>>>>>>> http://hackage.haskell.org/package/xmonad-extras .
>>>>>>>>
>>>>>>>> -Brent
>>>>>>>>
>>>>>>>> On Mon, Apr 6, 2015 at 11:45 PM Dave Macias <davama at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> This is my first time posting here so i hope im doing this right.
>>>>>>>>> Just updated ghc to 7.10.1 and had to rebuild xmonad,
>>>>>>>>> xmonad-contrib, and xmobar.
>>>>>>>>> I also use xmonad-extras but it failed during the build. I tried
>>>>>>>>> using cabal and also from source but both give same output:
>>>>>>>>>
>>>>>>>>> $ cabal install xmonad-extras
>>>>>>>>>
>>>>>>>>> Resolving dependencies...
>>>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>>>> Building xmonad-extras-0.12...
>>>>>>>>> Failed to install xmonad-extras-0.12
>>>>>>>>> Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ):
>>>>>>>>> Configuring xmonad-extras-0.12...
>>>>>>>>> Building xmonad-extras-0.12...
>>>>>>>>> Preprocessing library xmonad-extras-0.12...
>>>>>>>>> [1 of 2] Compiling XMonad.Util.WindowPropertiesRE (
>>>>>>>>> XMonad/Util/WindowPropertiesRE.hs,
>>>>>>>>> dist/build/XMonad/Util/WindowPropertiesRE.o )
>>>>>>>>> [2 of 2] Compiling XMonad.Actions.Volume (
>>>>>>>>> XMonad/Actions/Volume.hs, dist/build/XMonad/Actions/Volume.o )
>>>>>>>>>
>>>>>>>>> XMonad/Actions/Volume.hs:173:23:
>>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>>                              defined at
>>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>>                              imported from ?Prelude? at
>>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>>
>>>>>>>>> XMonad/Actions/Volume.hs:173:43:
>>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>>                              defined at
>>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>>                              imported from ?Prelude? at
>>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>>
>>>>>>>>> XMonad/Actions/Volume.hs:200:62:
>>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>>                              defined at
>>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>>                              imported from ?Prelude? at
>>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>>
>>>>>>>>> XMonad/Actions/Volume.hs:215:32:
>>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>>                              defined at
>>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>>                              imported from ?Prelude? at
>>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>>
>>>>>>>>> XMonad/Actions/Volume.hs:225:58:
>>>>>>>>>     Ambiguous occurrence ?<*?
>>>>>>>>>
>>>>>>>>>     It could refer to either ?XMonad.Actions.Volume.<*?,
>>>>>>>>>                              defined at
>>>>>>>>> XMonad/Actions/Volume.hs:66:4
>>>>>>>>>                           or ?Prelude.<*?,
>>>>>>>>>                              imported from ?Prelude? at
>>>>>>>>> XMonad/Actions/Volume.hs:15:8-28
>>>>>>>>>                              (and originally defined in ?GHC.Base?)
>>>>>>>>> cabal: Error: some packages failed to install:
>>>>>>>>> xmonad-extras-0.12 failed during the building phase. The exception
>>>>>>>>> was:
>>>>>>>>> ExitFailure 1
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I got to look at the log but it just has what i pasted above.
>>>>>>>>> System is Arch 3.19.2-1-ARCH
>>>>>>>>>
>>>>>>>>> Any input is appreciated.
>>>>>>>>> Thanks
>>>>>>>>> dave
>>>>>>>>>  _______________________________________________
>>>>>>>>> xmonad mailing list
>>>>>>>>> xmonad at haskell.org
>>>>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> xmonad mailing list
>>>>>>> xmonad at haskell.org
>>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> xmonad mailing list
>>>>>> xmonad at haskell.org
>>>>>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>>>>>
>>>>>>
>>>>
>>>
>> _______________________________________________
>> xmonad mailing list
>> xmonad at haskell.org
>> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.haskell.org/pipermail/xmonad/attachments/20150415/4260e6ae/attachment-0001.html>